- higher head gasket?
- Installing Aftermarket air filter, what to do with vacuum lines?
- need help finding cold aid intake on a t1
- Comparing Intakes
- Maximum boost, log intake
- G valve installation problem? Defective?
- Cold Air Intakes.....................Compare!
- Turbo Intake tube question
- How do i find/ recognize a G Head
- from carb to mpfi
- PVC valve
- Changing Intakes
- Help on vacuum lines, I missed one? Pics included.
- 1 or 2 piece, whats better?
- Is my head dead???
- Recirculate Bov or not
- F-4 cam ??
- Well im staying N/A for now
- Help 445 head
- 1985 Charger Turbo setup Questions
- FMIC on a mini
- *Pics* Restoring "turbo" valve cover & 2 piece intake wrinkle black w/ TU fuel rail
- I need some Turbo advice
- Comp Cams beehive springs
- some pics i finnaly took of my front mount setup
- Different turbo setups
- Help!!!!!!!!
- Garolite intake spacer
- Help With Front Mount Install
- porting a 287 cyl head
- Water entrance relocation
- get up and go
- My $0.02 vacuum block
- turbo to airbox boot
- What are the CFM specs for a Stock GLHS Intercooler?
- 1987 what intake
- more problems, valvetrain noise help?
- Some Valvetrain questions....need input!!
- One-piece intake experiment
- Rampage carb lovin
- My Top End...
- Non Turbo 3L Duster TB? ++
- Heat Shield Tape on FMIC piping?
- Carbonfiber Cai - Tester Needed
- DFW Failed Inspection.
- Exhaust Valves
- Has anyone ever tried a CAI for Carbureted cars????
- Valve work *PICS*
- CAI??? Do they make them for our cars?
- Running PIG rich
- 89 Daytona ES 2.5l Vacuum Hose Issue
- Enforcerdaytona's new intake manifold
- fmic for a daytona
- Turbo to intercooler pipe connector
- Intercooler hoses blowing apart
- FMIC Paint Question
- what happened to the group buy on vac manifolds?
- Camshaft journal scouring, can i still use this head!
- ANOTHER question (sorry) Weber Carburetor?
- Ported 2 piece intake? NEED HELP HERE
- TBI valve cover baffle under a turbo valve cover?
- Corrosion of valves
- Just a bit more help
- Why i get Lean all the time!!!!!!!!
- Quick intake question
- Vacuum Line Puzzle
- Silicone Coupling size.
- performance cam?
- BOV flange question, please help
- How to modify 1-pc intake
- i hate the RFL!
- Want to install BOV on 89 VNT CSX
- FMIC with T1 radiator
- What sized valves?
- what intake????
- T2 airbox
- New head castings?
- PCV valve Q's
- What do you think
- GLHS airbox
- Couple of questions for new intake
- How do I set minimum air?
- Cheapest cold air intake ever.
- whats better?
- Throttle Size Question
- Anybody try a Synapse blow off valve.
- Cummins...Cummins...who's got the Cummins?
- catch can setup and vac block setup
- holley vs bosch
- How to get BOV on Flange...
- Vacuum Lines missing...85' Daytona turbo
- Intercooler locations...
- New guy with questions!!
- knife edging throttle body blade?
- Horizon CAI (perhaps the answer is here, and i dont see it)
- FMIC piping
- Valve springs.
- bad boost leak
- New Direct Fit SMIC
- tbi cam for an 89 t2?
- Wide Band O2 Question
- dodge 2.4 headers?
- dode 2.4 headers?
- aftermarket intake manifold?
- Roller G-head!
- oil in the pcv hose and the air cleaner is normal
- Intercooler T1
- G-head or swirl head?
- rocket arm / follower geometry
- BOV location
- intercooler sprayers?
- mitsu turbo with t2 intercooler...
- FWIW, got a NICE bov pipe
- nitrous cooler
- Cracked g-head going on my daytona.. problem??
- porting tips
- 3 Bar
- 58mm Throttle body question
- Oil free airbox, PCV system works like it should. No OIL catch can used. *PICS*
- Getting intercooler paint off
- 95' Stratus Intake mod
- 1989 lebaron turbo help!
- before PT lifters drill
- silder or 90 2.5turbo roller
- Running Lean???
- FMIC in 87 GLHS
- Injector half-life?
- need help on 2.2 turbo
- ram air question
- delete this thread please
- Help!! Digi Dash out!!
- Installing Two piece intake
- PCV Check Valve?
- Cone filter
- where to get 3.3L intake manifold (for 90*neck)?
- installing bov and cone filter to a 1988 chrysler lebaron 2.2 turbo
- What Do you think of this intercooler?
- clever way to install air charge sensor without removing head or manifold?
- Boost Boost Boost
- cam timing?
- Need answers re: Chry. Conquest 2.6 turbo
- Porting Top End Parts Rec
- stock head power limits
- how much is this GLHS Intercooler worth???
- Need help on oil Catch Can routing.
- lay this in stone: who makes the best new head castings
- 92 Caravan Airbox on Dodge Aries
- Flow Differences Between 2 piece and 1 piece intakes?
- turbo xs rfl knock off?
- Difference Between NA and Turbo Valves??
- Treadstone intercoolers: Are they any good
- do I have +1mm turbo valves or not?
- FMIC Size...?
- log?
- best way to run intercooler pipes??? PICTURES???
- my intercooler?????
- FMIC help please!
- the G head
- Vaccuum Block construction*
- vac question
- The Newest Head Debate!!!
- adding aftermarket airbox 2.5 mini
- Need part # for 3.3 52mm tb gasket
- draw through question
- largest possible valves
- K&N air filters
- valve spring harmonix
- biggest intercooler in a daytona?
- which rad/ic is this?
- Different NPR IC Sizes?
- How air "works"
- when to get valvetrain parts
- catch can
- boost rise on nitrous
- Intake Question
- How big is your intercooler in a L-body& pics
- New TII Radiator or a Intercooler
- swirl or g head for high boost performance
- air filter placement
- Super 60 camshaft LSA?
- Purple Cam vs. 88 TBI cam Q's
- intercooling piping
- Machine Shops
- fine wire mesh filter?
- Dealership Map of PCV Baffle Inside Valve Cover
- Throttle Body and Daytona
- intake question?
- Any Advice?
- need head?
- were to find air intake?
- nice junkyard grab
- Where to buy 1/4"npt to 1/8th barb brass fitting?
- Would a TB from a 3.3L Fit my Daytona
- differances in turbo camshafts?
- Alcohol Injection worth it?
- Good source for ic piping and connectors
- whats needed?
- G head on tII?
- ported intake route
- injectors
- 2" plumbing enough?
- ram air on 87 omni question
- T2 cooler in a '89 mini with a/c
- valve question??
- Custom intake manifolds?
- Best Flowing 8V Cylinder Head
- i've got a problem
- stock daytona intercooler good or bad
- Opinion question
- Installing a temp probe for IC?
- T1 air box to K&N?
- will this cam help me?
- Need some advice on cam/valve train selection for my setup!
- cam specs
- Turbo II - Intake and Exhaust Studs
- FWD F-2 cam. Opinions?
- faster spool up?
- more throttle
- Intercooler
- Cutting T1 intake manifold open
- slight scoring on cam journals
- Stock air box- Good or NO good?
- has anyone seen these?
- powerstroke cooler in omni
- talon bov into daytona
- T1 intercooling ideas/advice
- custom pleunum parts
- crack in head by "arrow" = bad ??
- ghetto intercooler piping
- Converting suck through to Blow through worth it?
- mini van intercooler
- Intercooler Plumbing
- Head porting advice, and build up part numbers
- Calling all DC IC TI guys I need pics
- what type of head do i have?
- Pretty sure I have a boost leak!
- Stock TII intercooler piping size?
- 2 Piece Intake + 85G Body hood vent
- ...A few questions... HALP!!
- 4" versus 3" intercooler
- cam selection help
- Intercooling a T1
- FMIC for 87 CSX
- G Valve how to tell?
- head question!
- Is 2.2 Intercooler fits 2.5 t1??!!!
- bov ? vid inside
- Stock IC to FM
- chosing intercooler
- spraying the stock IC