- I can't believe it!
- Spark plug gap: can it be too small?
- 2.4 turbo swap in old school dodges Collection of pictures and info
- Cam Gear Advance/Retard
- Switching to 16 valves couple of questions
- Feedback on a TWO STROKE 2.0 Mangnum swap
- 91 Shelby Daytona 2.4NA swap running!!-with pix
- thanx for the info......
- water leaking front of block.
- degreeing cams
- I need help! Junkyard wanderers, please help me.
- 2.4L block differences
- Another horizon update
- Does the SRT4 turbofold fit in the engine bay?
- Detination or what?????
- Detination or what?????
- 2.4L 16v Turbo Omni
- Almost there...
- 2.4 swap no start code 26, 27 and 54
- 2.4 Daytona made it to Carlisle!
- Timing Belt
- My Hybrid ran for 20 min. pics
- My dyno numbers.
- Need some tuning help... boost issues...
- '87 Chrysler Town & Country SRT-4
- srt4 engine and trans into a turbododge?
- 2.4 swap 91 G-body pass mount info needed
- Just a teaser...
- 16 valve conversion help
- 2.0 dohc omni coming along
- Head oil feed line question.
- what parts do i need to remove off a 2.4l caravan
- Some 16v questions i didnt find the answers to.
- UP-date.... Motor is in!!!!
- 16v questions
- Hey, lM still alive!
- hybrid questions
- Bolting a chrysler turbo onto a T3 manifold
- Warning about power steering on a 2.4 swap.
- Getting aggravated, thinking MegaSquirt
- I need a little advice :(
- possible intake
- Hello again, ... looking for minivan project details.
- schematics for distributer adapter needed
- Maserati DOHC swap in 85 turbo Laser
- a few 16v conversion questions
- what to do here?
- 16V conversion in a Dakota
- Anyone a member of Neon.org?
- Best wiring setup for hybrid van?
- belt clearance
- front 2.4 mount
- hybrid question
- distributor on head adapter anyone making them?
- Can a DOHC conversion be done to an 85?
- check this out
- My Hybrid
- 2.2sohc to 2.4 dohc
- Pullys out of line??
- 16v head on an 86 2.2L turbo
- i need 2.4 torque specs
- useing the Stock DOHC cam/crank sensor w/ megasquirt v3
- Whitch intake should i use?
- 2.4 engine swap
- 2.4 NA in a 91 'tona
- 16v engine with SMEC
- Rear area of block and V16 head overlap amount?
- Minivan exhuast mani?
- issue with 2.4 block
- my hybrid motor
- i'm getting there
- s60 turbo
- pure sex
- MPG compared to 8v
- Converting to 16 Valve!!!
- ok let me lay this out ??????????????
- confused on why to convert to 16 valve
- why does a 2.5 hybrid pistons not hit the valves
- Finally made my cam gears
- N/A 16 Valve?
- dumb Q, head gasket
- Twin Mitsus?
- Has anybody made a drop in or crate motor yet?
- 2.5 l neon
- Injector question
- Hybrid 2.2 or 2.5??
- Charging, what do I need to do?
- Throttle Body Question
- Ahhh, she fits
- My 2.2 16 Valve Conversion
- My 1965 Dart
- Shelby 16v
- sixteen valve distributer questions
- 2.4L in Caravan?
- 16v conversion on carb setup?
- Timing belt seems a bit tight
- Question about my conversion and firewall
- 2.0 Magnum heads...
- thinkin about 16v
- dsm2.0 head dohc swap
- Another lives!!!
- Maybe putting 2.2L 16V masi into a Rampage
- question about a 2.4 head..
- Tall deck 2.5L hybrid timing belt?
- 2.4L coolant flow
- 2.4L swap into 91 daytona
- 2.5 finally crapped out
- SRT4 eng w/525 Tranny
- So lets talk heads.....
- 1984 Dodge Rampage Advice
- Running A/C on a 16V conversion
- Radiator fan
- Cam gears
- Adding piston oil squirters by way of balance shaft feed
- clueless about the 16v conversion...
- 2.5 change for 2.4
- What calibrations are people using on Hybrid motors?
- People using the distributor on the head...
- help me wrap up the details for a hybrid
- SRT swap mounts?
- 2.4 k car
- timing marks
- Ran the GLHT at the track
- N/A 2.4 to turbo 2.4
- srt4 intake on an L-body
- Capacitor on the side of the head
- Where exactly to drill drains and pressure holes?
- It lives again with pics
- Track next week, tuning is almost done
- what kind of turbos are people using
- differences between blocks
- mitsubishi head
- P/T vs Neon head
- EGR question (brace yourself)
- pics of exhuast manifolds.
- Electronic Distributor Adapter
- MUST it be a 2.5.....
- ITB's Baby !
- HELP!! 3 questions about my conversion
- Distributor adapters
- T3/TC head on T1/T2 block
- Official Megasquirt'n spark base Map.
- Switch to TII or go for it and Switch to SRT4
- 16v Distributor Adapter for SRT4 Head
- Antilag test and result. ( MS'n extra)
- Manual Power Steering or pump relocate?
- How your turbo spool?
- SRT4 Partslist needed for L Body swap
- 1gen Neon srt-4 swap.........
- good porting sites?
- Found a 160° Thermostat and it work!
- Is my compression to high?
- 16V - Head Castings Numbers
- Spark Plugs: Opinions?
- DSM Dohc swap
- Just A Question
- Pics of SRT 2.4 with acc. brackets and fuel rail
- intake questions
- How many hybrid is running?
- Another one runs
- Help
- Few Questions About My Conversion
- SUperchargers ?
- alt to intercooler issues
- Exhaust Manifold Choice
- Flywheel question
- F*ck Ups! Missing Hybrid Head
- Turbo Blues :(
- Too bad my HG is leaking.
- Fuel Rail Choice.
- Finally have some progress
- Hybrid progress thus far....
- Hybrid versus 2.4 Turbo - 85 Shelby Charger
- My conversion starts.
- Caravan 2.4L: alternator on front or back?
- Considering 2.4 SRT4 Turbo Swap
- omni
- Couple questions about hybrid swap
- Most Power
- hybrid on 87 electronics?
- what rods to use?
- My megasquirted Hybrid is running!
- Hybrid Runs!!!
- It Lives Again (2.4l\t850\ L Body Sc)
- It Lives Again (2.4l\t850\ L Body Sc)
- Gettin there
- Coolant temp sensor (2)
- T850 in L body Axle Help
- Value of an NOS Masi 16V head?
- Vacuum at idle
- Thought I would give a sneak peek of the omni
- So Close
- Nifty custom intake flange
- oil drain/ hose insulation
- ARP stud torque spec
- 2.5L Hybrid Top End Oiling Questions
- Lightest car to do a SRT swap
- Boo
- Performance numbers
- ebay header?
- motor in the omni
- ozspeed site down?
- Neon engine
- which head to use??
- Need new HG.. SCE titan not available..
- 2.5L SOHC turbo to DOHC?
- Pictures
- how to use a belt tensioner gauge?
- 2.4l swap questions
- 2.2 vs 2.5 for the street
- Oh no, not another fuel rail ?
- 2.4L in K-Body - What comes from where?
- fwd sg5 cal for hybird
- WIll this turbo work?
- Neon radiator
- last straight line before starting the engine !
- Power output
- 16V SOHC on Daytona
- I'm back for now, PICS
- Misc induction pics.
- Mount question?
- Whats the deal with 8 valve pistons, 2.2 and a 2.4 head?
- Intake / Exhaust Bolts
- Horsepower!!! 2.4 vs. Hybrid
- Engine mounting angles. Help Please
- Would this work?
- SRT-4 ELECTRONICS 2.4 swap
- hybrid problems
- my pistons have arrived-time to get busy!
- 2.4 with 87 LM
- Back in the Game
- Somebody wanted on of these.
- 16v head differences between early years and srt4
- Many setup questions........
- Hybrid 2.5 or 2.5 (differences)?
- 16v head on a tbi car ?
- Neon 5 speed with 2.4 swap????
- Any certain head better?
- temperature and torque effects
- Fuel Rail Question
- SRT Intake distributor clearance?
- 16v/omni update
- valves
- 2.0 questions
- Sizing External Wastegate
- Just saying I am back
- Tap & Die Kit.
- Cooling Q's
- Feeding the beast...
- Distributor kit, EBAY?