Turn/brake light failure

[black89shelby]

Fuse is fine,bulbs are all fine.Wiring is new and has traced no luck anyone else have this problem? 1989 daytona

[charger R/T]

what exactly works and what does not front and rear.(parking lights, brake lights, turn signal, and hazards) what do you mean wiring is new? Have you checked the grounds at the lights very common problem with these cars. brake light wire runs through the turn signal switch before going to the back of the car. Does third brake light work?
Tim

[black89shelby]

Quote:

Originally Posted by charger R/T what exactly works and what does not front and rear.(parking lights, brake lights, turn signal, and hazards) what do you mean wiring is new? Have you checked the grounds at the lights very common problem with these cars. brake light wire runs through the turn signal switch before going to the back of the car. Does third brake light work? Tim

Driving lamps is all no turn signals,brake lights whatsoever bought car 2 weeks ago and noticed they replaced a bunch of wires like a kit, fuse box and all

[charger R/T]

that can be hard to diagnois if they were redoing too much. Does the wiring around the turn signal switch look factory? I would start by checking for power at the flasher. One terminal should have 12v+ on it with the key on. the other wire travels to the turn signal switch. One of the brake light switch wires also has 12v+ on it. the other wire also goes to the turn signal switch. One thing to note is these cars came with 2 flashers 1 for signals and 1 for 4 ways. If the 4 way circuit does not work and its switch is on the turn signals will not work.
that a good start to look at. Post back what you find and we can go on.
Tim