 |
|
  |
 |
02-15-2008, 04:18 PM
|
#1
|
  |
*CANCELLED* New 2-23-08 Dyno day for CT NY MA RI
|
|
Resident piston cracker
Join Date: May 2003
Location: CT
My Ride: 92gtc vert
Engine: 2.5 8v
Induct: Turbo
1/4: 22.000
|
Hey Guys,
The date is February 23 I am looking to book the dyno at XX tuning in East Hartford.
Dyno will be $50 for fwd or rwd up to 5 pulls 1/2 hour. $75 with wideband and boost logging.
They also have a chassis dyno for awd that is going to be $150.
So let me know if you can make it, I was thinking of getting started at 10Am.
Here is their site
XX-Tuning - Dyno Proven Performance
Who is coming? Starting at 10am
1. Me- Winston
__________________
" Raise boost till you blow the head gasket(or crack pistons), then back off slightly."
1992 GTC convertible 2.5/568 aluminum fw/Tu 6puck feramic/s60/3in Tu sv/+40S/ FWD CAL /FMIC/PSSSSTSSSS
Come for a dyno run NEW Get-together 2-23-2008 @ 10am
http://www.turbododge.com/forums/f1/...-dyno-day.html
Last edited by crazymadbastard : 02-15-2008 at 06:27 PM.
|
|
|
|
 |
  |
  |
 |
02-15-2008, 10:54 PM
|
#2
|
  |
|
Re: New 2-23-08 Dyno day for CT NY MA RI
|
|
Still around, just workin
Join Date: Mar 2005
Location: Ma. in the 508 !!
My Ride: 87 csx # 175
Engine: 2.2 T III 16V
Induct: Turbo + Nitrous
1/4: 0.000
|
I might be able to make it.. i just bought ANOTHER laptop so I should be able to do some basic tuning this weekend.. I'll keep you posted..
__________________
Faster than a speeding ticket!!... someday
1987 SHELBY CSX #175 TIII POWERED ALL OUT DRAG !!!
1991 SPIRIT R/T TIII stock
|
|
|
|
 |
  |
  |
 |
02-16-2008, 12:31 AM
|
#3
|
  |
|
Re: New 2-23-08 Dyno day for CT NY MA RI
|
|
Naturally Aspirated
Join Date: Jul 2006
Location: Windsor Locks, CT
My Ride: 92 sundance duster
Engine: 3.0L 24v
Induct: N/A
1/4: 14.960
|
too bad it wont be around 15-20th of march, id be home and maybe have my swap legally on the road. *sigh* one of these times.....considering XX is like 25 minutes from my house
|
|
|
|
 |
  |
  |
 |
02-16-2008, 09:50 AM
|
#4
|
  |
|
Re: New 2-23-08 Dyno day for CT NY MA RI
|
|
Resident piston cracker
Join Date: May 2003
Location: CT
My Ride: 92gtc vert
Engine: 2.5 8v
Induct: Turbo
1/4: 22.000
|
Come on guys! lets go! Shadow, this is on the 23rd so no excuse for you.  As for me my car is still appart from the blown piston incident and will work on it today into the wee hours and the same every day so it will be ready.
__________________
" Raise boost till you blow the head gasket(or crack pistons), then back off slightly."
1992 GTC convertible 2.5/568 aluminum fw/Tu 6puck feramic/s60/3in Tu sv/+40S/ FWD CAL /FMIC/PSSSSTSSSS
Come for a dyno run NEW Get-together 2-23-2008 @ 10am
http://www.turbododge.com/forums/f1/...-dyno-day.html
|
|
|
|
 |
  |
  |
 |
02-16-2008, 05:49 PM
|
#5
|
  |
|
Re: New 2-23-08 Dyno day for CT NY MA RI
|
|
Naturally Aspirated
Join Date: Jul 2006
Location: Windsor Locks, CT
My Ride: 92 sundance duster
Engine: 3.0L 24v
Induct: N/A
1/4: 14.960
|
lol, im back @ school and the car isnt road legal yet so i cant make it :'(
|
|
|
|
 |
  |
  |
 |
02-17-2008, 08:48 AM
|
#6
|
  |
|
Re: New 2-23-08 Dyno day for CT NY MA RI
|
|
Resident piston cracker
Join Date: May 2003
Location: CT
My Ride: 92gtc vert
Engine: 2.5 8v
Induct: Turbo
1/4: 22.000
|
come on by and give moral support, we'll get you some pon-pons and an outfitQ. 
__________________
" Raise boost till you blow the head gasket(or crack pistons), then back off slightly."
1992 GTC convertible 2.5/568 aluminum fw/Tu 6puck feramic/s60/3in Tu sv/+40S/ FWD CAL /FMIC/PSSSSTSSSS
Come for a dyno run NEW Get-together 2-23-2008 @ 10am
http://www.turbododge.com/forums/f1/...-dyno-day.html
|
|
|
|
 |
  |
  |
 |
02-17-2008, 08:15 PM
|
#7
|
  |
|
Re: New 2-23-08 Dyno day for CT NY MA RI
|
|
Boostaholic
Join Date: Feb 2005
Location: west wareham, massachusetts
My Ride: 89 Daytona Shelby
Engine: 2.5L
Induct: Turbo
1/4: 0.000
|
its a no-go for me. i finally got the car running good. running a solid 14psi, full rpm band use, no more 4k drop offs. i even got help in putting an IAT in and running the S3 cal i picked up and that really really woke up the car. unfortunately i wont know what it'll put down due to something in the lower end not quite right... someting blew, im not happy. well least i have a spare bottom end to rebuild... maybe summer time now... hopefully...
__________________
Scotty
89 Daytona Shelby T-top - 2.5"T2", ST springs, KYB's, 11psi, no more smoke!!!
96 Pontiac Grand Prix SE - 3100, everything a GTP but the drivetrain and wheels...
|
|
|
|
 |
  |
  |
 |
02-17-2008, 08:22 PM
|
#8
|
  |
|
Re: New 2-23-08 Dyno day for CT NY MA RI
|
|
Naturally Aspirated
Join Date: Jul 2004
Location: Terryville, CT.
My Ride: 1986 GLHS #065
Engine: 2.2 Aluminum LongRod
Induct: Turbo + Nitrous
1/4: 11.921
|
I might stop in and check it out. my new motor is getting built right now so the car wont be there. I can always dyno my powerstroke and show you some real torque tho 
|
|
|
|
 |
  |
  |
 |
02-18-2008, 05:07 AM
|
#9
|
  |
|
Re: New 2-23-08 Dyno day for CT NY MA RI
|
|
Naturally Aspirated
Join Date: Jan 2003
Location: Connecticut
My Ride: 1986 GLHS #126
Engine: stock
Induct: Turbo
1/4: 12.920
|
if the weather is nice i might swing by just to say hi to everyone and check out the cars.
Winston: is it a for-sure event?
|
|
|
|
 |
  |
  |
 |
02-18-2008, 09:05 AM
|
#10
|
  |
|
Re: New 2-23-08 Dyno day for CT NY MA RI
|
|
Resident piston cracker
Join Date: May 2003
Location: CT
My Ride: 92gtc vert
Engine: 2.5 8v
Induct: Turbo
1/4: 22.000
|
FOh Shur!
MOre neons coming too.
__________________
" Raise boost till you blow the head gasket(or crack pistons), then back off slightly."
1992 GTC convertible 2.5/568 aluminum fw/Tu 6puck feramic/s60/3in Tu sv/+40S/ FWD CAL /FMIC/PSSSSTSSSS
Come for a dyno run NEW Get-together 2-23-2008 @ 10am
http://www.turbododge.com/forums/f1/...-dyno-day.html
|
|
|
|
 |
  |
  |
 |
02-18-2008, 09:26 AM
|
#11
|
  |
|
Re: New 2-23-08 Dyno day for CT NY MA RI
|
|
Naturally Aspirated
Join Date: Jul 2006
Location: Windsor Locks, CT
My Ride: 92 sundance duster
Engine: 3.0L 24v
Induct: N/A
1/4: 14.960
|
lol, my excuse is a 400 mile trip to go home if i wanted to go. and HELL NO, no pompoms or cheerleader outfit for me! :-p
|
|
|
|
 |
  |
  |
 |
02-18-2008, 09:51 AM
|
#13
|
  |
|
Re: New 2-23-08 Dyno day for CT NY MA RI
|
|
Naturally Aspirated
Join Date: May 2007
Location: Vancouver, Canada
My Ride: Chrysler Daytona C/S
Engine: 2.5L
Induct: Turbo
1/4: 0.000
|
Damn i wish i was in US, i love to come by and check other people cars and also dyno mine as well, im always curious how much HP and Torque i got with the setup im running so far. Theres one dyno in here but no TD's would be there and its $60 
|
|
|
|
 |
  |
  |
 |
02-18-2008, 05:45 PM
|
#14
|
  |
|
Re: New 2-23-08 Dyno day for CT NY MA RI
|
|
Naturally Aspirated
Join Date: Sep 2004
Location: Bristol, Ct
My Ride: 85 glh turbo
Engine: 2.2 turbo
Induct: Turbo + Nitrous
1/4: 11.510
|
NO! We do not want to breathe in more greenhouse gasses from your "powerchoke"..... Keep it home 
If I'm not working, I may stop by.
|
|
|
|
 |
  |
 |
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Quick Nav |
|
» Quick Tech |
|
» Market Place |
|
|
|
|
|
|
|
|
|
| |