srt4 Parts with Prices

[jdawg]

Just got this dmail (chrysler's email system) today, thought it may be of some interest! All prices list!
P4510868 NEW! Blow-Off Valve Diaphragm Stage 1, 2, 3R $89
P4510595 NEW! Wastegate Actuator — P350 Stage 2 $129
P4510365 NEW! 3.0 Bar Map Sensor Stage 2, 3R $80
P4510366 NEW! 3.0 Bar Tip Sensor Stage 2, 3R $110
P4510529 NEW! +30% Fuel Injector — Sold Individually Stage 2, 3R $89
P4510063 NEW! Fuel Rail Assembly — Demand Regulated Stage 3R $ $279
P4510554 NEW! Fuel Pump Module — 75 PSI Regulated Stage 3R $ $699
P4510864 NEW! Iconel Steel Center Section Turbo Cartridge Stage 3R $750
P4510865 NEW! Titanium Aluminide Center Section Turbo Cartridge Stage 3R $1,650
P4510866 NEW! TD05HR Hardware Kit — Includes Clamp, Snap Ring, Actuator and Elbow Bolts Stage 3R $120
P4510867 NEW! Compressor Cover Kit — Includes Cover, Surge Bypass Valve, and Surge Valve Bolts Stage 3R $225
P4510596 NEW! Wastegate Actuator — P420 Stage 3R $289
P4510625 NEW! Water Jet Turbo Toys $ $
P4510627 NEW! Inline Fuel Check Valve Turbo Toys $35
P4510626 NEW! Inline Water Filter Turbo Toys $29
P4510623 NEW! 4-Way Connector Turbo Toys $24
P4510602 NEW! Sprayer Bracket Turbo Toys $399
P4510632 NEW! Sprayer Pump Turbo Toys $60
P4510861 NEW! Wire Harness Terminals — Set of 10 Turbo Toys $10
P4510862 NEW! Blue Led Wire Harness Turbo Toys $4
P4510863 NEW! Red Led Wire Harness Turbo Toys $4
P4510601 NEW! Bezel Assembly Turbo Toys $199
P4510923 NEW! Water Jets — Set of 4 Turbo Toys $129
P4510922 NEW! Sprayer Brackets — Set of 2 Turbo Toys $25

[jdawg]

Heres another!
SRT4 (2003–05) New! Cat-Delete Kit — Intermediate pipe and down pipe included *P4510649 $429

[lil4drturbo]

nice, a great way to piece together a kit now! or if you mess something up, you can replace just that one piece!

[contraption22]

Quote:

Originally Posted by jdawg Heres another! SRT4 (2003–05) New! Cat-Delete Kit — Intermediate pipe and down pipe included *P4510649 $429

Anybody have more info on this piece?

[Andre Parker]

I'm very interested in the cat delete too.

[Keith Alto]

Quote:

Originally Posted by contraption22 Anybody have more info on this piece?

Mike,

Good thread here. http://www.srtforums.com/forums/showthread.php?t=117114

Little expensive for me. Has a resonator that looks like a cat.
I went with the Maxxfab and stock exhaust.
I didn't really want the car much louder than stock.
I hope it won't be. I'm installing it tomorrow.
Actually took me 20 min. to remove the stock downpipe.
I'll give a report after installation, but it's been 6 months
since I've driven my car.

[contraption22]

I just priced it from my dealer. $360. Nobody really pays list except insurance companies

[lil4drturbo]

due to the amount of part #'s the will be helpful in the future, can we sticky the page?

[contraption22]

Quote:

Originally Posted by lil4drturbo due to the amount of part #'s the will be helpful in the future, can we sticky the page?

Good idea.

[SRTurbo24]

Quote:

Anybody have more info on this piece?

Yes, I have this on my car with the Mopar cat-back exhaust. I put 200 miles on the car today and here's what I think: It does pull a little harder and is a only a little louder at MOST rpms. From idle to 2500 rpms it's about the same sound level as stock. From 2600 - about 3200 rpms it is louder. Quite a bit louder, on my car at least. Not obnoxiously loud, but it is louder. I passed probably 10 - 12 cops today including some that were stopped in town and none of them bothered me, so it can't be that loud.

[contraption22]

[quote=SRTurbo24] From 2600 - about 3200 rpms it is louder. Quite a bit louder, on my car at least. Not obnoxiously loud, but it is louder. [quote]

So i take it that means it's really annoying at highway cruising speeds?

[PurpleGLHT]

A buddy of mine has the cat delete on his SRT4, and it sound great, even on the high way.

[cobalt60]

jdawg: Thanks for the parts post! I've scoured the dodge.com and mopar.com sites and can NOT find internal parts listed, however.

Any info on SRT-4 pistons/rods/cranks in standard and over-bore perhaps?

Thanks!

Karl

[jdawg]

Crank is pn 4781643AA $140 list
piston/rod assemblies are pn 4884247AD $75.45 list

no overbore listed