WTB: 16v crank gear

[Rick]

Needed for a local guys who's R/T is broke in my driveway.

This is the one which drives the timing belt....R/T specific for those not familiar with them.

[kriss440]

how can he broke that gear?!
I dont know but i would verify if you realy need a new one.

[wasp]

i *should* have a spare one back here in a couple days. i'm just waiting to get the crank and gear back from the machine shop. will let you know for sure if you don't find one before then

[djd's turbo]

I'm the 'local guy' in Rick's post. I was having problems with the car and took it to a couple of local mechanics. One of them broke it by not putting things back together correctly. Rick is a HUGE help here!!!!!! Thank everyone VERY much!!

[kriss440]

Wow, i realy want to see pics !

How damaged it is?
Its quite a rugged piece, its probably repairable .

[Rick]

Quote:

Originally Posted by kriss440 Wow, i realy want to see pics ! How damaged it is? Its quite a rugged piece, its probably repairable .

Trust me at my hourly rate (3x any shop rate)it can't be fixed.

It was left loose and it took out the key, crank and gear..... If you want pics, bring your camera.

[CNH320]

Out of curiosity what makes the crank gear "R/T specific", i thought these gears were the same round tooth as on an 8V common block.

[Rick]

that would be a great help. i have a complete r/t engine apart being rebuilt at this time. I was going to use my gear to get him back together but mine will need to be replaced.....thus the ad.

Quote:

Originally Posted by wasp i *should* have a spare one back here in a couple days. i'm just waiting to get the crank and gear back from the machine shop. will let you know for sure if you don't find one before then

[wasp]

I have to drop off my DD at the body shop today (it got hit). I'll try to swing by the machine shop and pick up the gear so I can get some pics to be sure it's the right gear. Hang tight a little while.

[Rick]

It's all good. I still have to pull the engine so I can swap out the crank.

[wasp]

this may be a big let down. i went and picked up the gear (and my crank was done and bearings were in!)

anyways. here's what i got. the one in question is on the right. the one on the left is not for sale. unfortunately they appear to be slightly different.

[marty mopar]

#4442973 crank sprocket measures: 1 7/8 x 2 5/16 inches this is off an NOS one.

[Millerman340]

I call dibs on the Red car if it doesnt get fixed!!

[djd's turbo]

Go away, vultures, go away!!!! LOL!! I don't plan on getting rid of it unless the situation changes dramatically.

[djd's turbo]

Bump!! Anyone have a spare???