Lifted the head....

[bansheenut420]

Well. I found out today that a few weeks ago when I overboosted the car. It lifted the head. Today on the way home from a turbododge meet, I was messing around with a stealth rt when it overboosted again. Ondonti and I decided to dig alittle deeper to make sure nothing was hurt. I had previously done a compression test after I overboosted the first time, adn all was fine.
Today, one of the cyl is at 100 and when we do a leak down test, cyl 4 leaks into 3, 3 leaks into 2, 2 into 1 and they all leak into the coolant system. This video is what happened when we pressurized the no 4 cyl.
http://videos.streetfire.net/video/a...1-99850085034e

So, I have yet to drive this car at anywhere near its full potential. Next time the studs will be torqued to 100 ft/lbs and the fuel pump will be in and the lines clamped that can cause a problem like this. lol
Here is the datalog from when it lifted the first time.

Bet that srt8 would feel even worse to know that I had a lifted head when we raced and I walked him.

[jim34]

Does the zietronics unit have a way to set up a warning light or buzzer in case the afr goes out of range ?

[bansheenut420]

The new models do. They have a triggers and warning box for them. I just need to get the new pump in and clamp ALL of my lines so this wont happen again. Plus, I now know after talking to jackson I need to torque the headstuds down to 100 ft/lbs instead of 65.

[GLHNSLHT2]

need to change your sig

[bansheenut420]

Well, it "technically" runs. lol Its been running great for 3 weeks with a lifted head. But, your right I do. lol