Video from the track

[bansheenut420]

Here is a little video from the track this last weekend. Any detalis I missed just ask.
The Junkyards fat, slightly less homily, inbred co - Car Videos on StreetFire

[xinnix]

Awesome! Nice to see how much you love your car....

Don't have any details you missed but I do have a comment on your camera man.
He should pull back and go wider a bit more while shooting your runs and then zoom in on the times like he was doing.
Gives the viewer a better since of your speed and the power your running.

Great job. Can't wait to see that under 12 run..!

[wytedrummer]

leave it at 19psi and get rid of the things you dont need.

Hood can go, don't need that steering wheel(what performance does it give), stupid back tires arent doin anything but draggin a$$, rear hatch is just annoying, hmm the cupholders can stay, lights are a luxury, substitute those cushy seats for some lawn chairs, and toss the braking system(your thinking of going, no stopping)

Coupled with all the above, you should have no problem running high 11's, maybe some 12.3's!!!

hahahahaha

I made myself lol

[bansheenut420]

I refuse to give up my cup holder!
Thanks guys!

[Millerman340]

Hey Cory, How about putting a list together with a link in your sig on all the stuff & parts you are running. I've seen most of them but they are scattered in about 99 different posts! Your running the purple plate ?

[bansheenut420]

Quote:

Originally Posted by Millerman340 Hey Cory, How about putting a list together with a link in your sig on all the stuff & parts you are running. I've seen most of them but they are scattered in about 99 different posts! Your running the purple plate ?

I am working on a build thread, but its taking a while. I am up to where I put the holset on. Here is an up to date parts list. One the pressure plate question, no I am running a FWD dual diaphram and a clutchnet 6 puck and AB-SO-FREAKING-lutly love it. Its great for daily driving because I can slip it at lights, and so far has held up to 6 2nd gear burnouts. Very happy with it. I tested a single diaphram that was supposed to be 2500lbs, but something wasnt right with it. He DD plate fixed it all.

Parts list.

Here is a complete, current mod list.
ENGINE
-2.2l T3 shortblock
-Venolia forged pistons
-polished forged crank, balanced
-shot peened forged rods with re-drilled tops
-sealed power rings
-clevite main and rod bearings
-ARP hardware
-melling high volume oil pump
-Ishihara-jonhson windage tray and oil pan baffle,
-Balance shafts removed

HEAD/INTAKE
-ARP headstuds
-Cometic .074" mls headgasket
-LoneWolf performance head with stage one port/polish (stock head for now, going big valve head with the lonewolf/Onditty racing head)
-upgraded GEN3 FWD Performance lifters
-FWD Performance custom Titanium Valve spring retainers.
-LoneWolf performance stage one cams
-LoneWolf performance ported intake manifold
-FWD Performance ADJ. Cam gears
-58mm Throttle body
-4" Custom cold air intake
-Spearco 1010 CFM fmic with mandrel bent 2.5" pipeing
-TurboXS RFL BOV

EXHAUST/TURBO
-Holset HX-40pro Turbo with hogged out BEP turbine housing
-TurboConcepts 38mm external wastegate (with 1 bar spring)
-Custom 3" mandrel bent Downpipe with external wastegate dump
-LoneWolf Performance ported and thermal coated exhaust manifold drilled and tapped for EGT probe.
-3" mandrel bent SS exhaust
-3" Downpipe dump with electronic dump valve
-3"Magnaflow hiflow cat
-3"Magnaflow muffler

FUEL/INGITION
-Accufab AFPR
-58lb/hr injectors
-High flow billet fuel rail
-an fuel line
-Walbro 255 fuel pump
-DevilsOwn Progressive meth injection (Twin 14gph nozzles)
-FWD Performance Ground wire kit
-Aroura 8.5mm wires

TRANS/CLUTCH
-"Built" A568 trans. from FWD Performance
-Quaife LSD
-B&M short throw shifter
-Solid shifter bushings
-Fidanza light weight flywheel
-Clutchnet 6 puck sintered copper/ceramic clutch disk
-FWD Performance dual diaphragm pressure plate

ELECTRONICS/CONTROL/MONOTORING
-FWD Performance Custom 3 bar calibration with 8K revlimit
-HDI 2 stage Electronic boost controller
-Zeitronix wideband o2 meter with wideband o2, egt, boost, rpm, and tps monitoring and datalogging.
-OTC 2000 scanner/datalogger
-Zeitronix LCD display (displays EGT, wideband, lamda, boost in car without datalogging)
-AutoMeter boost gauge
-AutoMeter Oil pressure gauge

TIRES/WHEELS/SUSPENSION
17" RaceLine 6 spoke Gloss black wheels with polished lip
17" Firestone firehawks
-M/T ETdrag drag slicks 24.5x8x15 (VHT soaked)
-BGF T/A drag radials 225x50x25 (VHT soaked)
-strut tower bar
-PolyBushings.com poly motor mounts
-Solid bobble strut

"OTHER GOODIES"
-Vac Dist block with all silicone line
-Oil cooler
-180 deg thermo.
-ported waterpump

[rx2mazda]

Quote:

Originally Posted by Millerman340 Hey Cory, How about putting a list together with a link in your sig on all the stuff & parts you are running. I've seen most of them but they are scattered in about 99 different posts! Your running the purple plate ?

NOOOOOOOOOOOOOOOOO

[rx2mazda]

Quote:

Originally Posted by bansheenut420 i am working on a build thread, but its taking a while. I am up to where i put the holset on. Here is an up to date parts list. One the pressure plate question, no i am running a fwd dual diaphram and a clutchnet 6 puck and ab-so-freaking-lutly love it. Its great for daily driving because i can slip it at lights, and so far has held up to 6 2nd gear burnouts. Very happy with it. I tested a single diaphram that was supposed to be 2500lbs, but something wasnt right with it. He dd plate fixed it all. Parts list. Here is a complete, current mod list. Engine -2.2l t3 shortblock -venolia forged pistons -polished forged crank, balanced -shot peened forged rods with re-drilled tops -sealed power rings -clevite main and rod bearings -arp hardware -melling high volume oil pump -ishihara-jonhson windage tray and oil pan baffle, -balance shafts removed head/intake -arp headstuds -cometic .074" mls headgasket -lonewolf performance head with stage one port/polish (stock head for now, going big valve head with the lonewolf/onditty racing head) -upgraded gen3 fwd performance lifters -fwd performance custom titanium valve spring retainers. -lonewolf performance stage one cams -lonewolf performance ported intake manifold -fwd performance adj. Cam gears -58mm throttle body -4" custom cold air intake -spearco 1010 cfm fmic with mandrel bent 2.5" pipeing -turboxs rfl bov exhaust/turbo -holset hx-40pro turbo with hogged out bep turbine housing -turboconcepts 38mm external wastegate (with 1 bar spring) -custom 3" mandrel bent downpipe with external wastegate dump -lonewolf performance ported and thermal coated exhaust manifold drilled and tapped for egt probe. -3" mandrel bent ss exhaust -3" downpipe dump with electronic dump valve -3"magnaflow hiflow cat -3"magnaflow muffler fuel/ingition -accufab afpr -58lb/hr injectors -high flow billet fuel rail -an fuel line -walbro 255 fuel pump -devilsown progressive meth injection (twin 14gph nozzles) -fwd performance ground wire kit -aroura 8.5mm wires trans/clutch -"built" a568 trans. From fwd performance -quaife lsd -b&m short throw shifter -solid shifter bushings -fidanza light weight flywheel -clutchnet 6 puck sintered copper/ceramic clutch disk -fwd performance dual diaphragm pressure plate electronics/control/monotoring -fwd performance custom 3 bar calibration with 8k revlimit -hdi 2 stage electronic boost controller -zeitronix wideband o2 meter with wideband o2, egt, boost, rpm, and tps monitoring and datalogging. -otc 2000 scanner/datalogger -zeitronix lcd display (displays egt, wideband, lamda, boost in car without datalogging) -autometer boost gauge -autometer oil pressure gauge tires/wheels/suspension 17" raceline 6 spoke gloss black wheels with polished lip 17" firestone firehawks -m/t etdrag drag slicks 24.5x8x15 (vht soaked) -bgf t/a drag radials 225x50x25 (vht soaked) -strut tower bar -polybushings.com poly motor mounts -solid bobble strut "other goodies" -vac dist block with all silicone line -oil cooler -180 deg thermo. -ported waterpump

too late!:(

[bansheenut420]

Quote:

Originally Posted by rx2mazda too late!:(

uhoh, what did I do? lol

[rx2mazda]

Quote:

Originally Posted by bansheenut420 uhoh, what did I do? lol

Took up all the servers bandwith. lol