TurboDodge.com MarketPlace Shelby Registry Contact Us

Advertisement - Remove these ads today by clicking here.
 

Go Back   TurboDodge.Com - Turbo Dodge forum for Turbo Mopars, Shelbys, Daytona, SRT-4, PT Cruiser, Omni and more! > Turbo specific > 16v Conversion
Reload this Page 2.4L swap into 91 daytona

16v Conversion Converting to 16V status

Reply
Page 3 of 11 < 12 3 456 > Last »
 
LinkBack Thread Tools

Old 11-05-2007, 07:19 PM   #31
Re: 2.4L swap into 91 daytona  
Naturally Aspirated
 
Join Date: Oct 2007
Location: Wolcott, CT

My Ride: 91 Daytona
Engine: 2.4
Induct: Turbo
1/4: 0.000

Posts: 189
Feedback: (1)
how to shorten an axle shaft..... or maybe how not too......

either way its done, hope it doesnt vibe.
Rock Kustoms is offline  
Reply With Quote
Old 11-05-2007, 07:22 PM   #32
Re: 2.4L swap into 91 daytona  
Naturally Aspirated
 
Join Date: Nov 2007
Location: Olalla, WA

My Ride: '88 Horizon R/T
Engine: 2.4L DOHC
Induct: N/A
1/4: 0.000

Posts: 189
Feedback: (0)
Love it! I was considering doing that to one of the axles on my Omni, till I realized the morons at AutoStoned had sold me a normal axle, rather than an Omni one..
UnaClocker is offline  
Reply With Quote
Old 11-05-2007, 07:33 PM   #33
Re: 2.4L swap into 91 daytona  
Resident piston cracker
 
crazymadbastard's Avatar
 
Join Date: May 2003
Location: CT

My Ride: 92gtc vert
Engine: 2.5 8v
Induct: Turbo
1/4: 22.000

Posts: 3,763
Feedback: (20)
Looks like I have been missing some major fun!
Let me know if you need a hand tomorrow night.
__________________
" Raise boost till you blow the head gasket(or crack pistons), then back off slightly."

1992 GTC convertible 2.5/568 aluminum fw/Tu 6puck feramic/s60/3in Tu sv/+40S/ FWD CAL /FMIC/PSSSSTSSSS

Come for a dyno run NEW Get-together 2-23-2008 @ 10am
http://www.turbododge.com/forums/f1/...-dyno-day.html
crazymadbastard is offline  
Reply With Quote
Old 11-05-2007, 07:39 PM   #34
Re: 2.4L swap into 91 daytona  
Mo' valves, mo' boost
 
jonnymopar's Avatar
 
Join Date: Jan 2005
Location: Southeastern MA

My Ride: Daytona ES
Engine: 2.4L DOHC
Induct: Turbo
1/4: 0.000

Posts: 380
Feedback: (0)
Looking good! What did you use for a lower radiator hose?
__________________
Jon J.

1989 Daytona ES 2.4L - MPH (and, turns out, MPG too!!)
2003 Neon SXT - MPG... yeah just MPG
jonnymopar is offline  
Reply With Quote
Old 11-05-2007, 07:43 PM   #35
Re: 2.4L swap into 91 daytona  
Naturally Aspirated
 
Join Date: Oct 2007
Location: Wolcott, CT

My Ride: 91 Daytona
Engine: 2.4
Induct: Turbo
1/4: 0.000

Posts: 189
Feedback: (1)
yes ill be around tomorrow night, just hit up the cell

stock lower hose for the daytona, removed 5" from the center straight part of it.
Rock Kustoms is offline  
Reply With Quote
Old 11-06-2007, 06:37 PM   #36
Re: 2.4L swap into 91 daytona  
Naturally Aspirated
 
Join Date: Nov 2007
Location: Olalla, WA

My Ride: '88 Horizon R/T
Engine: 2.4L DOHC
Induct: N/A
1/4: 0.000

Posts: 189
Feedback: (0)
That's about what I did for the radiator hose on my Omni.. Not sure exactly what model it came from, but it came from one of the TD's I've parted out over the years.. Could be any one of a dozen different cars. Going to be a real PITA when I need to replace it, since I don't really know which car it came from.
UnaClocker is offline  
Reply With Quote
Old 11-06-2007, 07:35 PM   #37
Re: 2.4L swap into 91 daytona  
Naturally Aspirated
 
Join Date: Feb 2003
Location: Toledo, OH

1/4: 0.000

Posts: 191
Feedback: (0)
That is a really neat idea with the axles especially with a project like mine where I'm not 100% if it's going to work correctly.
Did you just cut the axles and slip them into a tube and weld them?

Carlos
lotsaboost is offline  
Reply With Quote
Old 11-06-2007, 07:39 PM   #38
Re: 2.4L swap into 91 daytona  
Naturally Aspirated
 
Join Date: Oct 2007
Location: Wolcott, CT

My Ride: 91 Daytona
Engine: 2.4
Induct: Turbo
1/4: 0.000

Posts: 189
Feedback: (1)
i pressed the axles into that tube, very tight fit to keep it aligned. that weld is done down both sides, its better than plug welding because plug welds dont heat up the base metal enough for an app. like this.
Rock Kustoms is offline  
Reply With Quote
Old 11-06-2007, 08:36 PM   #39
Re: 2.4L swap into 91 daytona  
Naturally Aspirated
 
Join Date: Oct 2007
Location: Wolcott, CT

My Ride: 91 Daytona
Engine: 2.4
Induct: Turbo
1/4: 0.000

Posts: 189
Feedback: (1)
more pics
Rock Kustoms is offline  
Reply With Quote
Old 11-07-2007, 09:47 PM   #40
Re: 2.4L swap into 91 daytona  
Naturally Aspirated
 
Join Date: Oct 2007
Location: Wolcott, CT

My Ride: 91 Daytona
Engine: 2.4
Induct: Turbo
1/4: 0.000

Posts: 189
Feedback: (1)
few more
Rock Kustoms is offline  
Reply With Quote
Old 11-09-2007, 11:21 PM   #41
Re: 2.4L swap into 91 daytona  
Naturally Aspirated
 
Join Date: Oct 2007
Location: Wolcott, CT

My Ride: 91 Daytona
Engine: 2.4
Induct: Turbo
1/4: 0.000

Posts: 189
Feedback: (1)
its alive..... too drunk for more info.... check back tmrw
Rock Kustoms is offline  
Reply With Quote
Old 11-10-2007, 01:08 AM   #42
Re: 2.4L swap into 91 daytona  
Naturally Aspirated
 
Join Date: Jun 2004
Location: Jacksonville, Fl

My Ride: '88 Shelby Z TII
Engine: 2.2 TII
Induct: Turbo
1/4: 14.284

Posts: 3,573
Feedback: (0)
nice job!
Reaper1 is offline  
Reply With Quote
Old 11-10-2007, 06:34 AM   #43
Re: 2.4L swap into 91 daytona  
Naturally Aspirated
 
Join Date: Oct 2007
Location: Wolcott, CT

My Ride: 91 Daytona
Engine: 2.4
Induct: Turbo
1/4: 0.000

Posts: 189
Feedback: (1)
it needs to be timed, and the plug wires i bought dont work w/ the stupid cap, thats ok, soon to be megasquirted, with coil packs

also have a massive oil leak, i think rear main
Rock Kustoms is offline  
Reply With Quote
Old 11-10-2007, 03:14 PM   #44
Re: 2.4L swap into 91 daytona  
Naturally Aspirated
 
Join Date: Oct 2007
Location: Wolcott, CT

My Ride: 91 Daytona
Engine: 2.4
Induct: Turbo
1/4: 0.000

Posts: 189
Feedback: (1)
not starting again...... got the new plug wires all made up, plugs are getting SOAKED in fuel.

think the FPR is 55psi, i have a set of injectors, anyone know what the stock stratus ones flow? the ones i have are 21lb/hr@49 psi if i recall. also have a set of yellow ford ones.

any advise?
Rock Kustoms is offline  
Reply With Quote
Old 11-10-2007, 03:58 PM   #45
Re: 2.4L swap into 91 daytona  
Resident piston cracker
 
crazymadbastard's Avatar
 
Join Date: May 2003
Location: CT

My Ride: 92gtc vert
Engine: 2.5 8v
Induct: Turbo
1/4: 22.000

Posts: 3,763
Feedback: (20)
Did you mod the distributor like so:

TurboDave's 2.4 Turbo Neon Homepage
__________________
" Raise boost till you blow the head gasket(or crack pistons), then back off slightly."

1992 GTC convertible 2.5/568 aluminum fw/Tu 6puck feramic/s60/3in Tu sv/+40S/ FWD CAL /FMIC/PSSSSTSSSS

Come for a dyno run NEW Get-together 2-23-2008 @ 10am
http://www.turbododge.com/forums/f1/...-dyno-day.html
crazymadbastard is offline  
Reply With Quote
Reply
Page 3 of 11 < 12 3 456 > Last »

« Previous Thread | Next Thread »


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

» Quick Nav
- Home
- Classifieds
- Timeslips
- Gallery
- Vendors
-- Directory
- Tech Articles
- Donate
Sponsors
remove ads

Powered by vBadvanced CMPS v3.0.1
Credit Counseling | Computeach | Personal Loans | Mortgage Calculator | Personal Loan