dyno #

[turbocolt2.4L]

well it was a spare of the moment my buddy had a few cars for the dyno and finished early so we strapped the colt on and was on there for 4 hours and 36 pulls,463HP,320ftlbs,and 28 psi of boost a few minor problems first the coil pac kept getting loose than we keep seeing water but didnt know were it was coming from after putting it on the lift the water pump is leaking so need to replace it ,than the turbo almost fell off the 4 bolts that hold it to the header got loose and one fell out so we put a big fan on it to cool it and i tighten it all up made a few more pulls when we were pulling the car of dyno to put it on lift for oil change and trans fluid change my buddy found half of the turbo gasket on the floor so needless to say the guage said 28psi but we had a major boost leak at turbo to header so ill get all this fixed next weekend and see if i could get to the track soon.

[detobias]

wow good numbers ! congrats !

and of course Murphy is at work full-time :0

well it couldve been worse - your turbo couldve fallen off at the 1/8 mile, oiled down the tires, and you wouldve rolled & flipped 12 times

[4Daytonas]

Congrats on the swap, the numbers knocked me out. Still got the 1.6 header &carb? head and bolts?

[Ondonti]

how do those numbers stack up to your expectations?

[turbocolt2.4L]

im happy ,i'll fix the boost leak and get on there again.

[89turbodude]

nice numbers man, I am looking to see what you get when the turbo is actually attached, maybe those torque numbers will jump up.

[martijn001]

Nice numbers!