afpr

[Boogieman142]

has anyone made one and how did u do it?

[mwinkle353]

Just get the B&M command flow unit for a mitsubishi eclipse. Harv has been using one for quite some time now. And he reports that it works perfectly.

You just cut the hat off of your original stock unit and clamp on the parts from the kit. And you have an ajustable fuel pressure regulator without changing any lines of your stock fuel rail system.


Wink

[Harvii]

Sure:
AEM
SX
ACCEL
Summit Racing
MSD
Megan Racing
JET
APEXi


=). I've never heard of anyone making their own although I've had some success with this B&M 'kit' http://store.summitracing.com/partde...5&autoview=sku

PS Here's pix of my setup http://harv.f0e.net/fprinstalled/

[Boogieman142]

yeah on the 3.0L yahoo group, there are directions on how to do it but they are very vague it was cheetah that did them.

[roguetrip]

i need to drive up to summit and buy one of those suckers and toss it on for the future upgrades

[Harvii]

Quote:

Originally Posted by Boogieman142 yeah on the 3.0L yahoo group, there are directions on how to do it but they are very vague it was cheetah that did them.

not really anything to the directions. The directions that come with it for the DSM FPR are exactly what you'd follow to install on a 3L fpr.

[Moparbishi]

really easy and great mod

[Boogieman142]

no, i meant that the directions there were how to modify the stock one but they are vague, in one part is says bring to a machine shop and have them machine the dimple and cut a hole. If there were pics that would be great.

[irocelectric93]

Sweet im going to pick one up...thanks for the recommend Wink and the pics Harv

[Boogieman142]

btw harv, did u get my pm

[Boogieman142]

so whats the ideal pressure to set it at with all of the "Basic" mods done. 52mm tb, cai, 5.0 coil, bpe udp, etc... but without ported plenum

[Boogieman142]

aka what pressure is everyone runnin

[Rampage1967]

I made none for a 2.5 turbo, gonna do the same with an early style 3.0.
Used a copper pipe cap, bolt & nut, & jbweld . . . works great.

[Boogieman142]

thats the one that i was going to make but decided against it.

[Boogieman142]

which one will fit a mitsu lower