Finished!! Forged piston block, Custom valve head (flowbenched)

[Ondonti]

Cant work on the car till I finish my midterms.

I just took one this morning (did great on) and then I take another one tonight (probably not gonna go so well). I stopped working on the car saturday night. Probably Tues night (very late) or wed afternoon I can play with it again.

I still gotta take the whole side of the engine off to do the cam timing since I just pulled the belt cover to get to the cam.

[Ondonti]

Here it is. Need to set the cam timing now and then put the side of the motor back on.

[Ondonti]

I lost spark on the car somehow.

AHHHHHHHHHHHHH

I dont know whats going on.

No voltage between the 2 wires leading to the coil when I have my roomate turn the car over.

[Reaper1]

It's something REALLY simple...take a step back...breathe. I KNOW you can do this!!!!!

[Ntrain2k]

Git 'er dun!

[Ondonti]

Got voltage from the battery to the positive coil lead........

[Ondonti]

Crap, I just swapped ECU's on my spirit, and it appears the ECU on the duster died since saturday.....

[Ondonti]

Okay, the duster starts........it just doesnt realy respond to me opening up the throttle for a few seconds.
Dang cams maybe.


I just made a movie of the car running. I will try to upload it somewhere.

[m90daytona]

Quote:

Originally Posted by Ondonti Okay, the duster starts........it just doesnt realy respond to me opening up the throttle for a few seconds. Dang cams maybe. I just made a movie of the car running. I will try to upload it somewhere.

putfile.com

[Una]

YouTube.com
No response to throttle is usually TPS or MAP..

[Ondonti]

http://videos.streetfire.net/video/w...11018899d1.htm

tell me what you think is wrong.

Im not getting any MAP or TPS codes but I do get a constant check engine light.......?????

[Una]

Constant check engine light.. What codes ARE you getting? It really seems like a TPS problem to me.. Got a vacuum line on your FPR?

[Ondonti]

I got code for TPS. the TPS might be messed up because I swapped it onto this TB after a strange occurance of events to get back my 52mm tb.

I will try putting it on my spirit to see if the TB is having the problem or if its wiring.

[Una]

Got that meter still? Ground one probe and probe the wires on the TPS with the ignition on, engine off and TPS plugged in. One lead should be about 5v, one should be near 0v, and the other should go up and down as you open and close the throttle.

[Ondonti]

The TPS sensor itself seems to be fine when I install that TB on my spirit

Edit, I will try that stuff.