Garage Storage Organization and Garage Cabinets

3.0l Sleeper · **fuel pump**

whats the best fuel pump for the 3.0l v6... i saw this one on ebay.. might grab one.http://cgi.ebay.ca/NEW-Fuel-Pump-Dod...QQcmdZViewItem

Ondonti · 03-08-2007, 03:00 AM

what do you need the pump for? replacement or performance?
That is a stocker.

m90daytona · 03-08-2007, 10:28 AM

performance pump=walbro 255 lp/h

3.0l Sleeper · 03-09-2007, 12:03 AM

well im replacing the existing one cuz my tank is rotten and my fuel guage doesnt work... so im going to replace the pump, sending unit, tank, straps, the ring to holf the sending unit in and filter.. where would i get my hands on the walbro 255 Lp/h pump?

irocelectric93 · 03-09-2007, 01:19 AM

turbos unleashed and fwdperformance sells em.

3.0l Sleeper · 03-09-2007, 01:22 AM

and are they for the 3.0l?

3.0l Sleeper · 03-09-2007, 01:27 AM

i basically have to replace my fuel system because of a rotten tank.. so what would be the best performance set up.. for my 3.0l v6 93 shadow

Ondonti · 03-09-2007, 02:40 AM

THey are supposed to be plug and play but the one TU sent me was not because they sent the version for the older cars.

3.0l Sleeper · 03-11-2007, 11:41 PM

so im going to order a 255 lp/h pump asap.. just dont know who to order from.. ive ordered some things from FWP and have been very happy with what i got but the page says that the pump is for 89 and older.. but with TU you can select the year.. 90 and up id rather order from FWP because i have an account.... soo.. what im trying to ask here is can i get a pump for my 93 from FWP or am i going to have to go with TU?

**jory** · 03-12-2007, 12:02 AM

Whats the difference between the newer and older versions? A fuel pump is a fuel pump, there can't be too much of a difference can there?

3.0l Sleeper · 03-12-2007, 12:12 AM

i have no idea.. thats why im asking.. i gotta get this tank and pump and sending switched out.. im putting the car back on the road next week

irocelectric93 · 03-12-2007, 11:03 AM

Its cheaper at TU.

lookin · 03-12-2007, 12:14 PM

Not trying to hijack.

Silly question:

The TU catalog says it is for 85-93 cars. Does a 1995 3.0 really take a different pump? Or is the catolog reference an oversight?

One more:

Would it be OK, to install a Walbro 255LPH pump, in a modified but presently NA 1995 3.0L?

3.0l Sleeper · 03-12-2007, 09:23 PM

IMO it should be ok to put in the 255 pump on a lightly modded engine with it being N/A and im not to sure but i thiknk as long as you have the stock FPR everything should be fine.. my setup is N/A so im hoping my assumptions are right..

m90daytona · 03-12-2007, 09:45 PM

i think it depends on what car the 1995 is

and

yes it is okay to install on a stock 3.0. although if you plan on leaving it stock i would go w/ the 185 lp/h.