hay Ondonti

[mopar3.0]

just to give you some inspration, a local guy built a 3.4 turbo cavlaier
hes running close to the same trap speeds as you, and close on the 1/4 too i think he just hit the dyno and made
298.7 WHP @ 5000 RPM
415 Wheel FTlb at 4300 RPM
at 11 psi
i wounder what your numbers are at your 5 psi

[Ondonti]

Well I will have to get this motor together again properly. Intake manifold will probalby not be done again for awhile.

I did drop of my megasquirt with bansheenut and will see if he fix the wiring on the back of the board to match the distributor setup I need to use.

I am guessing only 250whp and 300ft/lb @ 5psi because of the elevation and my low compression. Maybe a little less.

[mopar3.0]

i dident even know you had your can on the dyno, hes running ms also fully tuned. i think there more hidden power in your little 5 psi lol, cant imagine 11

im sure the mega squirt will make a diffrence

[Ondonti]

nono, no dyno.. Im GUESSING
Based on the numbers from the track and assuming my trap speed was a little bit low because of shifting into 3rd gear @ like 20-30mph causing a bog.

[Ubmbass]

Sorry Brent, but your trap speeds are high for your et, not low. lol

[Ondonti]

I meant low for what the car should have done. Wasted a lot of time @ 2000 rpms in 3rd gear on both good passes I made.