1 piece oil pan gasket on pre CB?

[scott_s]

Looks like the 1 piece fel pro oil pan gasket should work on an 88 pre-CB. Can someone confirm that??

[glhs496]

The CB bolt pattern is a little different in front, it has that little 8mm bolt in there. The crank end maybe different too, I don't remember.

But the point of my reply is just an fyi, I had that gasket on my CB and it leaked. First time I ever used one. I went back to the RTV and rubber ends and it's fine now.

[scott_s]

thanks, for the info.

[cawcislo]

I have a one piece gasket on my common block, but I don't know if they make one on pre common block. The pans are difference (common block vs non common block). So you definately can't use a common block gasket on a non common block and vice versa. Common block is 13 bolt holes and non common block is 11.

[cawcislo]

I have a one piece gasket on my common block, but I don't know if they make one on pre common block. The pans are difference (common block vs non common block). So you definately can't use a common block gasket on a non common block and vice versa. Common block is 13 bolt holes and non common block is 11 and pans are longer I believe.

[allmotor]

Quote:

Originally Posted by glhs496 The CB bolt pattern is a little different in front, it has that little 8mm bolt in there. The crank end maybe different too, I don't remember. But the point of my reply is just an fyi, I had that gasket on my CB and it leaked. First time I ever used one. I went back to the RTV and rubber ends and it's fine now.

ya'll should know that the front pan seal is totally different between common block and non-common, but u can use the one peice seal on the 1986-1988 2.5 tall block.