? on Cold Air Filter Routing

[matt59]

Is the ECM Box "cold air" intake sealed enough to put a cone filter on the end of it instead of the stock filter box?

I want to put the Cone filter in the area foward the Radiator with out cutting the car up.

Thanks,

Matt

[matt59]

Hellooo... (Knock-Knock-Knock) am I on?
No one has any advice or ideas?

[Twisted Noodle]

I have mine coming out from the rubber hose on the turbo and with 2, 45's it is aimed down towards the ground. I have pictures on my profile. They are hard to see because everything is painted black.

[Twisted Noodle]

The picture is sorta blurry. I think I smeared grease over the lens.


http://www.turbododge.com/forums/att...lter-cai-2.jpg

[matt59]

The picture is sorta blurry. I think I smeared grease over the lens.

Not that the picture was blurry, I couldn't see the Filter components.

[Twisted Noodle]

You can see the pipe coming off the rubber hose right? (the bottom one). The filter is on the elbow. It is out of sight because it 45's down toward the ground.