will it fit

Hey guys I just got a Charger and I was woundering if my daytona seats will bolt in to it cause the charger ones are ripped and ugly. My next Question is what do I need to put my 5x100 crabs on to this four bolt car (will the daytona hubs fit??) and if I was to do that has any one ever put 6.5inch crabs on a charger?? will they fit with the hole having to steer the car???

[Joryn]

Well i know what ive been told. Which is that pretty much any wheel hub setup will bolt directly to my car(which also has the stupiod 4 bolt setup). so your daytona wheel hubs should go in there without a hitch. As for the 6.5" crab problem i couldnt say for sure, but i imagine it would fit without problems.

[Mike B.]

The seats won't bolt in. You'll have to modify something to get them to fit. L-bodies are neat but almost everything on them is unique to L-bodies only.

The crab wheels will fit (same dimensions as pizza wheels) as long as you swap in the other 5-bolt hardware.

these are shelby crabs thou pizzas=6in crabs=6in shelby crabs=6.5in

[Shelby85Charger]

I have a set of four 5 lug hubs with all the proper brackets including the front calipers. everything you need to install a 5 lug sytem.
Only items I do not have is the four rotors and the rear calipers, they where no good.

PM me and well talk.

I also have all of that stuff plus I can get rear discs for it if I want

[supercrackerbox]

Quote:

Originally posted by canaboost these are shelby crabs thou pizzas=6in crabs=6in shelby crabs=6.5in

Offset is still the same I believe. They'll fit.

New questions. will daytona trunk struts fit the hatch and will me gas shocks off my daytona fit (the charger has a lot of play back there and I dont know it the gf would like that )

Quote:

Originally posted by supercrackerbox Offset is still the same I believe. They'll fit.

no they are not we measured