Logic module problem?

[Dodgeglht]

OK guys,

I am restoring the GLHT and I am having to redo the interior due to rust. I removed the logic module to prevent damage to it. and found rust on the backside of it. While unplugging the logic module, I also found the connectors to be very loose.

When I found this I removed the 4 screws holding the back on, and found quite a few burn marks on the circuit board.

What can I do to check it out? Prior to restoring the car it was running a little rough. I didn't think anything of it at the time, but when I saw the burn marks on the board I thought it could be causing my problem.

Thanx for any help given."thumbs up

[shlbyturbo]

nothing you can really do. you know the ECU works since the car ran, but for how long? thats a different story

[Dodgeglht]

cool. I'll be replacing the LM soon then. Atleast I found out before the car left me stranded.

Thanx for the info."thumbs up