autometer gauge questions

[boltthrower]

im installing the gauges where the original boost gauge and info center(picture of car thingy)originaly was on my 87 shelby z. i was wandering how people went about hooking up their boost gauge. did you use the hose for the old boost gauge? if not what did you do? also can anyone tell me which wires are the + and - on the round conector that hooked up to the original boost/info center? i want to splice into that for the lights. last question. how did you hook up the o2 gauge? whats needed?
thanks

[1mean88z]

use the facrory rubber line for the boost gauge the orange wire is for the dimmer and the black wire is the ground. as for the a/f hook the red wire to a switched 12v in your case you can use the
dark blue wire on your ign. harness as for the ground must be clean and not connected with any other ground. the purple wire is what connects to your o2 sensor if you have a 3 wire you will need the black one. sodder it if you can it is very sensative.

[boltthrower]

awsome! thanks alot!"thumbs up