Building my own 3" exhaust - source??

[anonymous_user]

n/m

[crazymadbastard]

Summitracing.com or jcwhitney.com local truck shops may sell some bends too.

[badfuzz89]

Let me know if you find somebody in Iowa that bends 3" I couldn't find anybody to bend 2 1/2" a couple years ago for the Plymouths exhaust.

[TDSRT4]

I built my own it cost me $100 bucks total.. 3" dual all the way back from turbo.

[Dodgeboy77]

TDSRT4 - Tell us some details! Bill

[anonymous_user]

After I posted, I found that Racing Solutions sells 3" mandrel bends and accepts paypal. I ordered from them two 90's and one 45. They were shipped promptly and arrived in a short time. Just what I'd expect - excellent mandrel bent aluminized pipe.

To the best of my knowledge, no one in my area mandrel bends 3". I have not checked in Des Moines. But, all I needed were the bends and I can weld up my own exhaust.

I'm considering ordering some more 45's to re-do the Falcon exhaust as I welded it up with what I could get locally - non-mandrel bent 45's.

[87turbodance]

So their stuff is aluminized... I assumed it was just raw mild steel

[tkelly27]

they have aluminized, mild, and SS bends. They are online, look up racing-solutions on google.

A Ford Falcon? Sweet!

[crazymadbastard]

Quote:

Originally Posted by tkelly27 they have aluminized, mild, and SS bends. They are online, look up racing-solutions on google. A Ford Falcon? Sweet!

I received very good service from them!

They should advertise here too.