Which exhaust for my baron

[Boogieman142]

so how do i make the 3" exhaust kit fit my exhaust manifold on a 3L?

[glhs727]

Based on your picture, that is like no lebaron I have ever seen. BUT it does look exactly like a spirit/acclaim, so USE the spirit/lebaron and NOT the daytona kits.
The catback pipes run the same way regardless of 4 or 6 cylinder, and the new pipes will replace your old pipes. I beleive the DP will also be similar in mounting to stock, but that question is best answered by a 3.0 person. I have only owned TURBO fwd mopar cars.
later,
Cindy

[Turbodave]

That Lebaron name got thrown around a bit too much back then.

2 door lebaron pre 1986 = K body
2 door lebaron 87-95 = J body

4 door lebaron pre 87 = k body
5 door lebaron hatchback 85-89 = H body
4 door lebaron 90 and newer is an AA body.

[Boogieman142]

what i am asking is the 3" "Donut" part of the dp, will that just hook up to the rear of the exhaust manifold i believe it is 2.25" pipe there right now.

[jory]

the stock manifold uses a 2.5" donut so you might need an adapter to got from 3" to 2.5".

[Boogieman142]

yea, thats the problem, i have not found an "adapter" to do it

[jory]

I've seen plenty of those adapters at Pep Boys, Advance Auto etc. I'm using a 2.5" to 2.25" adapter that goes into my 2.25" muffler.

[Boogieman142]

i mean like an adapter "donut" but anyways i got it figured out (I think)