04-30-2006, 10:34 AM
|
#1
|
  |
Best/Fastest way to do a Turbo swap
|
|
Naturally Aspirated
Join Date: Aug 2005
Location: Alberta
My Ride: '91 Daytona Shelby
Engine: 2.2L TII
Induct: Turbo
1/4: 0.000
|
First time turbo swap here
I'm just about done converting my '89 Daytona Shelby to TII status with afew other upgrades 
But I'm swapping out the tiny Mitsu turbo and putting in a rebuilt Garrett TII. Would the best way of tackling it be by going through the top and pulling the intake manifiold off? I looked underneath while it was jacked up, and it looks like the bolts from the turbo to the exhaust mani would be tough to work with from down below. Any ideas/info would be greatly appreciated  |
|
|
TurboDodge.com 
