Question forT-2 Turbo intercooler setup for 2.2 sundance

[mikes87t2]

I am setting up a intercooler in this thing and I'm trying to be as creative as possible since this car was not made for a T-2 and intercooler. Also to double check the turbo outlet closest to the motor is the intake right??? I have had this apart for about 6 months and want to make sure I have this right. The out let furthest away is the one that goes to the throttle body????? I am moving the battery to the trunk to gain some room with this stuff especially since the motor moves some when under torque. Clearances are tight. Thanks for any input!!!!

[tryingbe]

87 2.2L turbo?

Is your car converted to blow-thru with late model TI intake manifold??

[mikes87t2]

I have the one piece T2 intake and T2 exhaust manifold. I kept the T1 turbo and have the T2 throttle body. My clearences for intercooler pipes and hoses is going to be tight to the turbo inlet and outlet do to the angles and the throttle body being almost right on top of them.

[tryingbe]

Have you read this two page?

DDG- Garrett turbocharger conversion
DDG- Conversion page from 85-87 Turbo I to Turbo II