hybrid intake hose

[shelbyturbo1989]

Alright, I just got a T3/T4 hybride with a 50 trim compressor side. The intake on this side is right around 3 inches OD. I've seen people just putting a filter right on the turbo, but I recently bought a big K&N so I don't really want to scrap that now. I went to NAPA and looked around in the back at all the radiator hoses and the biggest one I could find was only 2.5 inches. I need a fairly sharp 90 degree bend to come off if the turbo and point towards the front of the car, pretty much the way it is on a factory TII car. Any ideas where I would be able to get something like this locally? and if not where could I look online for something. I wasn't really looking at getting those silicon couplers cause they're pricey, if I have to I will but I would rather find something like a radiator hose. Any suggestions?

[crazymadbastard]

Try a truck supply store.(semi truck)

[89daytonaTII]

don't TBI cars or 3.0 V6's have 90* 3" rubber peices for intake hoses. looks like they would be perfect.