Super 60 Kit

[Mario_Boost]

Injectors can be had from a vendor for $140

The map sensor can be found on ebay or at a gm dealership for around $50
here's an example on ebay http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW

The turbo can be had for about $500-$600

That's roughly $700-$800 U.S.

I'd say you're getting ripped off or that there's a cheaper route.....

Plus, you still need a fuel pump ~ around $100

and you need a recalibrated ECU ~ $185 through turbos unleashed.

[mrmagnum]

Quote:

Originally Posted by Mario_Boost I'd say you're getting ripped off or that there's a cheaper route..... .

That's why I'm here to get the proper info

[Mario_Boost]

Turbo Dodge Specific vendors:

www.********************
www.badassperformance.com
www.fwdperformance.com

[jdawg]

everythings avail except the head and wiring uprgrade if u need it

[minimopar]

Seeing as how you can get the true Super 60 Turbo, +40s, and 3bar MAP from TU and/or FWDP for less than $750 US, I would go that route.

[Una]

Less than $750? Eh, if you skip the wastegate can and swingvalve on that turbo.. but it's not very useable without those parts.. with them I believe it was around $850 just for the turbo..

[minimopar]

Hmmm...good point. Guess I was assuming you had a core to start with. You're still money ahead, plus you have a lot of other options like 3" swingvalve, S70, etc. Times sure have changed from the late 90s.

[stephenrussell]

How hi PSI can you run on this setup?

[OmniGuy123]

Quote:

Originally Posted by stephenrussell How hi PSI can you run on this setup?

It all depends on how cool you can keep the boost, and how much fuel you can deliver.

There are a couple guys running over 30PSI. I am only running about 20 with a similar setup to what you speak of, but that is enough to make you go pretty quick.