cranks

[sup3rfr3ak]

will a 88 non turbo throttle body crank fit/work in a 86 turbo 1 motor

[looneytuner]

Welcome back dude!!!!! Don't know the answer, but somebody will step to the plate. If your old computer is whole yet how about taking to gp's. He can get up and running for 8.95 per month. No tolls from anywhere. There is another tder coming from Germany to Scott AFB this week I think.

[sup3rfr3ak]

haha thanks and YES! im back hahahaa.... but yea i bought the daytona from granpal, and has only 60psi on one or 2 of the cylinder so we are gonna try and to take the rods, bearing, and crank out of that 2.2 tbi motor and put them in the daytona so im pretty sure it would work but im not positive so figured id ask

[puppet]

Aside from the 6 bolt vs. 8 bolt issue .... they should interchange.

[sup3rfr3ak]

ok nvm i had things backwards, is what where doin is putting a 86 t1 block in , but taking all the internals out besides pistons and rings, and rods...then putting in 88 tbi crank , and rod bearings

[puppet]

Yep.

[sup3rfr3ak]

is a 88 tbi 2.2 crank? the same as a 85 t1 2.2 turbo crank.... stregnth wise?

[puppet]

Both are cast, so, yes.

[sup3rfr3ak]

my big concern is now, im starting work here soon and im not sure im gonna have time to swap cranks, transmissions and axles and stuff b4 i start work... one or 2 of the cylinders has 60psi of pressure do you think the car will last a month or 2 like that till i have a complete new block built.. forged pistons/forged crank/t2 rods

[puppet]

Let me consult my Stone of ZanZabar .... ( $hmmmmm .... $hmmmmmm )

[trance]It will last .... [/trance]

Sorry, damn cat jumped on my head. I'll try again later, after I rebuild my strength.