Bore sizing problems/questions

[mpbiv]

Not too long ago I posted asking what the stock bore size was for a 88 2.2 T1. The answer I got was 3.4449", and I just found one of my books which says 3.44 is the stock bore size. The numbers are pretty close. I measured the size as best as I could with a set of digital calipers, the bores measured 3.479-3.480"

The question is which measurement is exact. One would put me at .040 overbore and the other would be more like .035 overbore.

My book shows it at 3.444".

[mpbiv]

Ok so two people for ~3.444. Makes me feel better