trying to choose between two wideband setups

[ZDaytona]

could someone with some wideband experience help me out here please! Im struggling between the INNOVATE wideband setup and the Ziertronix wideband setup. Maybe someone out there has had some experience with both systems and can tell me which one is better and why.

thanks,
Badger....

[GLHNSLHT2]

I was gonna get the Zietronix setup but their new gauge still isn't available and I got a sweet deal on a XD-16 Innovate setup. I liked the zietronix because it had a simulated narrowband signal to feed the ECU. Well the innovate has this too but I didn't know about it till I recieved it. The innovate also has 2 programmable outputs. 1 is for the simulated ECU feed. And the other can be used for whatever you want. It's expandable as well. You can get the LC-1 for $179 on ebay and use your laptop to display it's virtual gauge. If you want a generic wideband gauge innovate makes one for $99 so for $280 you're at the same spot as the Zietronix. You can also find the XD-16 setup on ebay for $317-327. I don't think you can go wrong with either of them. Does the Zietronix come with the O2 sensor? I can't remember off the top of my head.

[tkelly27]

Does the innovative datalog?

[GLHNSLHT2]

the Innovate LC-1 will datalog the a/f channel. you have to add parts to it to datalog other stuff like boost, rpm, etc.

[ZDaytona]

thats one of my questions......what parts do you need to buy to include boost and EGT into the datalogging (besides the A/F which the LC-1 does) when I actually e-mailed innovate they recommended the "auxbox (LMA-3)but in reading what it does on their website it still doesnt answer what is needed to datalog boost and EGT's.....and if I buy both the LC-1 and auxbox, can I still run the XD-16 at the same time as the auxbox is connected?

[saw wave analog]

megasquirt

[ZDaytona]

Bumpage.....

[R/Tony]

Quote:

Originally Posted by saw wave analog megasquirt

+1

Use MS + LC1 and you are done

[GLHNSLHT2]

Quote:

Originally Posted by ZDaytona thats one of my questions......what parts do you need to buy to include boost and EGT into the datalogging (besides the A/F which the LC-1 does) when I actually e-mailed innovate they recommended the "auxbox (LMA-3)but in reading what it does on their website it still doesnt answer what is needed to datalog boost and EGT's.....and if I buy both the LC-1 and auxbox, can I still run the XD-16 at the same time as the auxbox is connected?

I'm not sure yet as I haven't purchased them but I think you can use just the SSi4 to add more inputs. Yes you can run the XD-16 gauge, the LC-1 and the Auxbox all in series at the same time. You could have the LC-1, 2 auxbox's, an ssi4 and 3 XD-16's running at once if you wanted too. It's all plug and play and works together.