Garage Storage Organization and Garage Cabinets

**building a serial interface**

anyone know where to get the printed circuit boards (the ones on the chem site at yahoo) for building this thing, I have everything else and don't want to build frankenstein. they say" Precision Governors Inc." on them.

BuRn__ · 07-24-2003, 05:38 PM

TTT, i also want the serial interface card, but i have no idea where to start in making the thing.

DblTrbl · 07-26-2003, 10:05 AM

For Serial Boards; clendenc@execpc.com

07-30-2003, 08:12 AM

I think that's for the diag port on the car, I found a guy selling the whole kit for 28 bucks, email him, clendenc@execpc.com

07-30-2003, 08:15 AM

Same here. That yahoo board just seems to be the place to find more freakin questions.

Ha.

BuRn__ · 07-30-2003, 08:53 AM

in the attached pic, where does the cable plug in to?

GovtContact · 07-30-2003, 09:00 AM

The cable attached to the board connects to the diagnostic port (cable on passanger side under the hood by the wheel well). Or what I did to avoid cables running from under the hood to inside the car, I just spliced into the Tx and Rx signal lines coming out of the LM.