01-15-2004, 02:41 AM
|
#1
|
  |
no spark
|
|
Naturally Aspirated
Join Date: Jan 2004
Location: Savannah,GA
My Ride: 92 Iroc R/t
Engine: 2.2l DOHC Turbo III
Induct: Turbo
1/4: 0.000
|
I have a 92 IROC R/T Daytona with a t3. The car's cam sensor died over two years ago and I just now got an exact replacement. The problem that I am having now is that the coil pack is not putting out any spark. I have metered the plug coming into the coil pack and I get 2 pins reading 12v, 1 reading .5v with the car in the crank position. When I go to the ON position I get no activity at all at any of the pins. Does any body know what the proper voltage is supposed to be in this connector. Or could anyone with a t3 check these voltages for me. I would really like to drive this car again it died after owning it for about a month and a half. Thanks
|
|
|
TurboDodge.com 
