most boost/ WI only

[unluckyty]

Looking for who has ran the most boost, using water/meth injection only (no intercoolers) and their results.

Thanks, Greg

[krazy4]

someone ran 19 lbs on here i think
doesnt that drag mopar neon just use injection instead of intercooling?

[unluckyty]

I would like to run 19# to 21#.
Results so far are 15# with a 3gph nozzle with winter washer fluid, 93 pump gas.
Car is 2.2, stock turbo,+40's, 255 lpm pump, 3 bar cal, Devil's own progressive WI kit.

I have a 5gph nozzle to work with next .

Greg

[wrench]

Believe it or not i run 24-25 psi and it went 106 mph but i couldn't get it to hook.I'm intrested in alky inj. any help?

[87turbodance]

I used to run straight water injection on my old t1 log. I had the knock sensor disconnected and I ran 15psi all day. I think I was using a 5GPH nozzle and an old fuel pump. When the old fuel pump rusted solid I went ahead na did a T2 conversion with an intercooler. I dont presently have water injection but I'm thinking about adding it in addition to my intercooler for the summer racing. I already have 3 nozzles installed in my upper intercooler hose for a three stage setup but they're just capped off right now. If you had enough water and fuel I dont see why you couldn't run 20+ psi with no intercooler.