nozzle/injector placment

[GLHTroy]

not installing an alky kit at the moment but i will be running a devils own progressive kit. i will start with one injector and go from there as needed(per devils own tech support advice). not gonne be pushin mor than 15psi to start. but i don't know the best/optimal place to put an injection nozzle with a single nozzle system???? should i put it on the top side of my one piece t2 manifold right after the throttle body?????? or right in the middle of my manifold?????

Thanks
Troy M

oh yea.... if you have pics of your nozzl/injector placement that would be a big help.

[turbometh]

The nozzle needs to be before the throttle body. If you put it in the intake there will be poor distribution and most off all the nozzle cannot be in the intake without a solinoid because the vacuum will suck fluid through the nozzle. If you are running a BOV the nozzle needs to be after the BOV. You dont want to push alcohol filled air into the engine compartment.

[whistlin']

Quote:

Originally Posted by GLHTroy oh yea.... if you have pics of your nozzl/injector placement that would be a big help.

You won't be disappointed with the devilsown kit.

[GLHTroy]

thanks for the advice and for the pics!!!

my only ? now then is how does it work when the nozles are done multiport and placed directly into the intake manifold i have seen it on this form. jus curiose

thanks again

Troy M