I'm impressed! - Page 3 - TurboDodge.Com - Turbo Dodge forum for Turbo Mopars, Shelbys, Daytona, SRT-4, PT Cruiser, Omni and more!

CSXT802 · 09-23-2007, 07:12 AM

Quote:

Originally Posted by xtrempickup

I helped installing one of these on my Iroc R/T today. By far the greatest mod for the money you can do. even good for you who dont want to run 93 because of price. you can spray Meth at low boost levels all the way up to high and its a lot cheaper and the octane levels better. Ive never heard my car soo rich as to pop on acceleration like a high revving dsm or Rx7 rotory motor. Really impressed, makes a day and night difference.

Meth head.........

xtrempickup · 09-23-2007, 09:31 AM

Thanks CSXT802, couldn't have gotten it in without your experience. everybody should look into this as one of their major purchases.

CSXT802 · 09-23-2007, 03:50 PM

Quote:

Originally Posted by xtrempickup

Thanks CSXT802, couldn't have gotten it in without your experience. everybody should look into this as one of their major purchases.

Glad I could help. Let me know when you crank that bad boy up. That TIII is just asking for 30 psi.

xtrempickup · 09-23-2007, 05:25 PM

its asking for it but i only have a stage 3 cal, time for a stage 4 or stage 5 so it can handle it and not cut out violently

**bansheenut420** · 09-23-2007, 09:33 PM

If you have a three bar map, and you should for anything over a stage one. You are good to 29 psi on the map. And with the meth, you wont have any problems. Crank that thing up

**bansheenut420** · 09-23-2007, 09:34 PM

And where did you put your nozzle on your R/T? I am wondering where to put mine.

xtrempickup · 09-23-2007, 10:27 PM

pipe to TB about 4 inch prior to it in the straight part right before the elbow. I have the factory ic hose 90 on a aluminum pipe about 6 inch that its mounted to, runs next to the stock overflow bottle on the car

**bansheenut420** · 09-23-2007, 10:36 PM

Quote:

Originally Posted by xtrempickup

pipe to TB about 4 inch prior to it in the straight part right before the elbow. I have the factory ic hose 90 on a aluminum pipe about 6 inch that its mounted to, runs next to the stock overflow bottle on the car

Sounds like we did a very similar intercooler set up. I am using the stock 90 coming off the TB as well. I was thinking of putting it in the same place. Thanks for the input.

xtrempickup · 09-23-2007, 11:26 PM

similar but i think you did a same end IC and i used 1 on each end like almost all japanse looking set ups