Water/Alcohol Injection via Injector

[Bernardd]

I'm working on a water/alcohol injection setup that will allow me to tune the amount of fluid injected based on a load sensor voltage. I want to control an injector rather than the pump. I've been looking at various injectors and have come across some info (the dodgegarage) that says that some dodges in the early 90's were considered Flex Fuel Vehicles. Does anyone have access to a couple of these injectors? I can't find any parts specific to these engines on Car-parts.com so I'm asking here.
Thanks, Bernard

[god910]

You might have better luck looking into the Ford FFV's. They are quite abundant. Mostly Taurus' and Sable's. (That's what I see ALL over the place w/ the little hippie leaf "FFV" emblem on the side) We got into a rather large debate about FFV's about a year ago on another forum I belong to. I'll search for the thread and post if I find it. HTH.

[Bernardd]

I did some research and have found the parts that I was looking for. Lucas injectors work as well. I've got ford 440cc '400's on my bench right now being tested with a Nissan fuel pump. I've found a bunch of guys using external bosch fuel pumps for a couple of years so far with no problems. Please post the link and thanks.
Bernard

I did a test yesterday with a fuel pump and a Daytona injector. All it did was shoot a stream of water across the shop. It didnt atomize the water at all why is that?
Im planing on doing this soon and so far Ive only seen peopel selling kits with NOS, Aquamist or mcmaster car nozzles.as for the pump I only seen shur flo and fuel pumps.