Alky mockup

[Khajjathefang]

Got bored and decided to throw together an alky setup out of some of the spare parts i have lying around, just need a pressure switch to turn it on and a light for the float switch gonna try it out on the small pump first and then maybe switch to the bigun

Video:
http://video.freevideoblog.com/Playe...3-336C0D7597FE

[DblTrbl]

That looks like the same tank I use for my intercooler water sprayer.

[Khajjathefang]

probably is once i throw in the hobbs switch and the wiring i figure im out like 20 bucks. i think i can work a progressive setup too

[1985ShlbyChrger]

That last gesture there was a bit "shocking" if i do say so myself. That's a good setup, I plan on doing the same type of thing, cold start injector and washer tank from a Daytona.

[DblTrbl]

Check to see how much pressure that pump puts out. If, for example, it only puts out 15psi, then if you have 15psi of boost pushing back against it, no alky will flow.

[Waramp]

What would be a good pump to use in a j-yard setup?

[Khajjathefang]

I think i'll hook the tubing up to one of my spare fuel pressure gauges

[OmniGuy123]

The video did not work for me?

[Garret]

I was reading on another site for alochol injection, if you hook up a pressure source to your Alky/water container, and place a bleed to get rid off the pressure after you turn your car off or you're not in boost. That the 15psi of manifold pressure would force the pump to work harder because the alky/water would already be pressurised

[thedanielm]

Quote:

Originally Posted by 1985ShlbyChrger That last gesture there was a bit "shocking" if i do say so myself. That's a good setup, I plan on doing the same type of thing, cold start injector and washer tank from a Daytona.

"shocking" hahahahahaha nice!

[Ondonti]

Very cool to show us in video form.