crooked front crossmember?

[jracecrazy]

I have try everything to figure out what wrong the steering knucle seem the same ,the A arm look fine but the driver side the tire opening on the front bumper is to close and the pass side look normal how can this be? Can the crossmemeber be align correctly. then when I change the driver strut it didn't align with the knucle I hat to force it in.

[22dodge]

Quote:

Originally Posted by jracecrazy I have try everything to figure out what wrong the steering knucle seem the same ,the A arm look fine but the driver side the tire opening on the front bumper is to close and the pass side look normal how can this be? Can the crossmemeber be align correctly. then when I change the driver strut it didn't align with the knucle I hat to force it in.

bent control arm?

[jracecrazy]

the control arm and even the ball joint recenly replece are fine. Or i miss something how can it be twsted foward

[22dodge]

Quote:

Originally Posted by jracecrazy the control arm and even the ball joint recenly replece are fine. Or i miss something how can it be twsted foward

WHY? ^ maybe the control arm is installed incorrectly? take it to a frame shop to make sure frame isn't bent.

[jracecrazy]

the ball joint was worn but the Aarm is ok .

[jracecrazy]

Anybody have taken the k frame out or is a way to put it back in a certain way? that may it be what happen? that is crooked.

[speeduphoria]

there is not much play in it so if its way off then either its bent or something else is bent.

Or they have the wrong knuckles ot that one side as the new ones are slightly different along with the control arms