Rims for my rampage? 4-lugs?

[Hemizach]

Alright I just want to know what wheels will fit on my rampage, I am looking for some but all I can find is stock wheels or ugly 14s or 15s for it. I'm not looking for 17s and 18s, but I want a 16 Inch wheel. Either way, what the heck will fit, those stupid 4-lugs!!!!! AHHHHHHHH

Help me out...

I know the Omni's use 4 bolt wheels but is everything else the same on them? If thats the case than it should be easier to find my 16s

[ol"blue]

Doesn't Honda (sorry) use the 4x100 bolt pattern?

[Will Martin]

I have Mazda RX-7 wheels on my Rampage:

[Hemizach]

Quote:

Originally Posted by ol"blue Doesn't Honda (sorry) use the 4x100 bolt pattern?

I'm not sure, what else would I have to worry about besides the bolt potten though?

[ol"blue]

Mainly back spacing. Not enough and you hit the fender, too much and you hit the struts.

[Hemizach]

Quote:

Originally Posted by ol"blue Mainly back spacing. Not enough and you hit the fender, too much and you hit the struts.

This is going to be yet another stupid question. but does the omni have the same specs?

[detobias]

OMG there are like a thousand different rims with the 4x100 bolt pattern and a FWD offset that will work on an L-body , or K or EEK or G or H or S or P or .....

pretty much any manufacturer's FWD 4 bolt rim will work they almost all run 4x100 and a decent offset

[allmotor]

amen to that. u could go to Tire Rack - Your performance experts for tires and wheels to find some more info.

omni is exactly the same as rampage and charger and first year daytona and first 2 years of minivan. 100mm x4. i have 2 15" 4bolt pizza wheels that came off an omni glh non-turbo, so theres a guaranteed fit to the rampage. go on ebay and surf around, u can find a lot of 100mm x4. i'd stay 6.5" max width just to be safe.

[Screamin4banger]

Quote:

Originally Posted by ol"blue Doesn't Honda (sorry) use the 4x100 bolt pattern?

I know the older ones did. When I went off-roading one Saturday night (long drunken story) I needed to replace some 13" rims on my 86 accord. I slapped a couple from a Turismo on it and went on with life.

[QwikSRT4]

You have to pay attention to the hubcentric bore. I just bought a set of Honda wheels, and they are just barely too small.

Omni/Horizon bore is 57.1mm, the Hondas are 56.1mm.

[xtrempickup]

factory honda wheels you may have to watch for, aftermarkets probably not an issue