82 k-car swap

[Berubeny]

Thought I would try it here.
I found a rust free 82 k-car that I want to swap to turbo. What year and make wiring harness would work best for this swap? If any what needs to be spliced? Any write ups or diagrams? I swapped a 89 N\A before that was a plug and play.Hoping this is close to that. thanks I know about the fuel tank and lines and the other B.S.

[Una]

Generally, I'd find an '88 or '89 K car that's turbo and get the harness and computer out of that. Get the FSM for your '82 and the year of the donor harness. Cut off the 40 pin bulkhead connector from your '82 harness, and splice it on in place of the 50 pin on the new harness.
I used to have the harness diagrams online, but the site they were hosted on is down. I'll have to get my FSM's back up on the scanner and put them on my DodgeTurbo.info website..

[Berubeny]

Cool Una let me know when you can get them up. thanks