wiring harness help

[jl93sundance]

what would need to be changed for a 90' turbo auto caravan harness to work for my 94' sundance turbo 5-speed conversion? any help would be appreciated. Thanks, Jim

[jl93sundance]

bump, any help at all?

[turbomini]

it will not work becuse the sundance is a boot at the fire wall and it plugs in under the dash and the van is a plug at the fire wall, but if you would like to sale the van harnees let me know ok thanks!!!

[jl93sundance]

thanks for the help, but i dont have the wiring harness i was just trying to find out before i bought one

[moparfwdsleeper]

you can make it work by doing some work on the firewall opening. I would stick with a spirit or shadow if it was me

[turbomini]

yea if you can find a 88 or 89 turbo sundance or shadow wirring harness that will work out the best becuse then its not going to be a question of will this work. it will plug in and work. or if you can find a 94 turbo car take that harness out and swap it to yours. you might get lucky

[moparfwdsleeper]

Austin, the 88 would require him to change the steering column and either swap the shaft on the rack and pinion to accept the 88 column or swap in a rack and pinion from an 88 to work. A 89 may plug and play but im not sure. a 90 or 91 will plug and play

[amiturbo]

sweet this told me exactly what I needed to know:-) thanks clayton

[Blue Iroc R/T]

Quote:

Originally Posted by moparfwdsleeper Austin, the 88 would require him to change the steering column and either swap the shaft on the rack and pinion to accept the 88 column or swap in a rack and pinion from an 88 to work. A 89 may plug and play but im not sure. a 90 or 91 will plug and play

92+ vehicles use a SBEC-II. 90/91 will plug in, but will not necessarily be PLUG AND PLAY. The SBEC-I & SBEC-II are different language and will most likely have interior dash problems.