Wiring Pinouts Needed: 90-93 G-Body Dash (Analog-to-Digital Conversion)

[phubarr]

Hi guys,
I'm trying to find the wiring pinouts to splice a 90-93 Daytona digital dash into a car originally wired for an analog dash. Its a long shot, but are the wiring harnesses connectors the same? (They weren't when I changed to a digital dash in my 89 Daytona). When I did that, I had an 89 FSM, which made the project much easier. Could anybody help me out who has a 90-93 FSM?

To aid in whomever might help me out, I'll describe what I'm working with. On the back of this 90+ digital dash, there are 2 rectangular connectors, a red one and a blue one.


The rectangular red connector - 2 rows of pins, 6 pins on top, 7 pins on bottom, most are empty. From top to bottom, left to right:
Pin 1: Orange
Pin 5: Gray/Black
Pin 7: Black/Green
Pin 12: Blue/White
Pin 13: Red


The blue connector - 2 rows of pins, 6 pins on top, 7 pins on bottom, some are empty. From top to bottom, left to right:
Pin 1: Gray
Pin 2: Black/Yellow
Pin 5: Yellow? Tan?
Pin 6: Green
Pin 7: Brown/Gray
Pin 8: White/Black
Pin 11: Violet/Red
Pin 12: Red/Orange

If anyone with a 90-93 FSM could help me out, I'd really REALLY appreciate it. Thank you!