Gauge Cluster/Lights/Signals... WTF???

[DC Turismo]

Well, I got out of my car when I arrived at school today and everything was fine. I get back in, turn the key, flip on my lights because it's raining and look down at the gauge cluster and WTF? The turn signal lights are both on, the high beam indicator is blue, the annoying buzz is going off like crazy, and the needles to the gauges is going bazerk! I turn the lights off, and the cluster goes back to normal, with all the gauges working and the indicators only lighting up if I use a turn signal? I turn them back on, and the same problem persists. I got out of the car and checked my four ways, they still work, but my high beams work as well, however the indicator comes on when I am on low beam? So I just left the lights off on the way home, but sitting at a stop light I tried them again, and same thing, except this time I could feel this like pulsing? like an electrical charge in my turn signal switch? It felt funny, so I hurried up and shut them off. All of the lights work on the car otherwise, but WTF's the deal? Turismo ---> <--- Me

Anyone ever experience this before?

[DC Turismo]

Well, of course it's an '80s Chrysler Product - it fixed itself? LOL... :

[Battlesmurf]

hehe..I have issues with mine...the air bag light comes on sometimes... (sometimes it does it when I need to switch gears....almost like it knows, and sometimes the tach goes out when I turn on my headlights ....sometimes...go figure : )

[Dan Blazevich]

Check some of the grounds, wires are getting old and probably starting to break.
My 87 SC's fuel gauge stopped working?. It worked just fine before winter.