How to convert 85/86/87-T1 to 87-T2 wiring. (needs clean up)

[bmxrider]

on the AIS motor connector, there A B C D wires. now, the log tb AIS motor has 2 and the wire color is different from the 4-pin wires. theres none that match. anybody know what wire i have to swap to and which 2 wires go to the LM? thanks

[als]

here is what i got the car was a 86 town/country wagan t1/ when with a 87 csx LM and 89 t1 mini intake/ gy/rd-ground >k39 in lm then yl/bk>k60 then br/wt>k40 then vt/bk >k59 thats for the ism. i did not see the tps, in my notes hope that helps/ALS

[bmxrider]

Quote:

Originally Posted by als here is what i got the car was a 86 town/country wagan t1/ when with a 87 csx LM and 89 t1 mini intake/ gy/rd-ground >k39 in lm then yl/bk>k60 then br/wt>k40 then vt/bk >k59 thats for the ism. i did not see the tps, in my notes hope that helps/ALS

i think the tps are the same setup regardless of the year. i just had trouble with the stupid AIS motor wiring. anyways thanks for your help als!

[89DodgeSpirit]

I used the AIS connector out of a 91 V6 Acclaim for my AIS in my 87 2.2 T1 conversion. I plugged it into the AIS - matched the wires on the AIS connector to the two wires that were left underhood and then ran the other two wires.

Mike

[shelbytuner]

heres my question. just did my T2 conversion on my glh w/ an 87 LM. did the wiring swaps just like mentioned here and added the extra ones. my car ran fine for 15 minutes then started to idle bad. Ive been through numerous test on my car. one code I got was speed distance sensor but noticed that on my 87LM I didnt have a wire going to that. my 86 doesnt have a speed distance sensor that I saw. is that another wire I got to add?

[als]

i think it,s inline with the speedo cable/ check by useing a diff. ISM see if it idles beterALS

[shelbytuner]

Quote:

Originally Posted by als i think it,s inline with the speedo cable/ check by useing a diff. ISM see if it idles beterALS

I'm sorry what is an ISM?