VNT parts for sale!! (sorta)

[90DodgeVNT]

Ok....in the next few weeks or so I will have the following parts off my '90 Shadow VNT:

-VNT Solenoid pack

-VNT airbox w/the hose off the PCV and the connector hose to the lower intercooler pipe

-Upper intercooler hose

-Lower intercooler hose (the metal one, *not* the rubber one like the CSX VNT)

-The 2nd 1/2 of the lower intercooler hose (rubber) which is almost impossible to find (trust me...took me 2 yrs to find this one )

-VNT intercooler

-CSX-VNT harness...kinda hacked up but has the VNT solenoid connections and some good wiring on it.


-Stage 1 Bathtub head with the following:

-Bronze valve guides
-3 angle valve job
-heavy duty springs
-Combustion chambers measured to 50 cc's

Flow humbers:

-intake side:178.50 cfm at .045 lift
-exhaust side: 144.75 cfm at .060 lift

Head was ported and polished by Mike Bachman.

Depending on the price that the head sells for, I may include the roller cam and the lifters as well. ***note on the head**
This head was tapped so that the coolant temp sensor mounts on the *top* of the waterbox and and a external Autometer guage was tapped into the old coolant sensor position. I will include the old guage with the head, but the fitting and the sending unit are MIA, but I am sure they can be found without too much of a hassle.



Any interested parties, send me a message. I would like to sell all the VNT items as one package (minues the bathtub head), and if it does not sell on TurboDodge then it will go on E-Bay shortly thereafter. The head is waiting to get cleaned up at the machine shop, so that is not quite ready yet either but should be in a few weeks.

Thanks,

[CaptTurbo]

does the lower intercooler hose fit on t2 setup or just VNT?

[90DodgeVNT]

Hmm...I think it should fit a T-2 but I have never tried it.

Difference is all how it all connects to the airbox...if you used the entire T-IV stock setup minus the airbox, you would have to plug the lower airbox bov connector on the metal pipe...

[asless]

The lower hose connects the metal lower piece to the cooler. It will fit on a t2 cooler, but you would still need or have to fabricate the lower metal pipe. I replaced the vnt cooler/rad in my 90 g-body with an 89 cooler rad and all the hoses fit fine.

[juxsa]

how much you want for that intercooler unit?