Take 10% off price listed! I need to get this stuff sold!
Everything is best offer. Will estimate shipping costs when making a deal.
The following parts are for sale:
$325 - 86 T1 Engine with 89 Common block top end. Engine ran fine until some oil leaked out of a camshaft gasket. Since then, it has made some sort of slapping sound. Not sure if its coming from the top end or bottom. Turbo was good last used (approx 5 years ago). Trans listed below.Image image Image
$125 - 88 2.2 T2 bottom end. Atleast one cylinder needs to be honed. Image Image
$75 - 88 2.5L NA
engine completely assembled. It ran when it was last installed in a car. Perfect for a turbo rebuild. Image
$700 - 89 2.2 Common Block hybrid engine (DOHC
neon). Complete bottom end. Has Forged pistons installed (+.20), lines ready to run to the cylinder head. Only problem is one piston needs to be replaced. Please see the pics. Only drove the car for 200 miles or so before I gave up on the project. Image Image Image Image
$200 - 2.2l Forged crankshaft from an 89 common block. Not really sure if it needs to be turned, would recommend having someone inspect it. Can take more pics if need be. Sprocket is still on the shaft as well as the aluminum cover. Image Image
$75 - A525 Transmission from an 89 N/A car. Worked great when it was last used.
$175 - A555 Transmission from an 89 Shelby Daytona. I have not used this transmission in a long time but I am pretty sure 3rd gear is gone, recommending rebuild.
$100 - 87 Wiring harness. I don't know much about this, please look at the pics and make sure its what you want. I do not see any cut wires. Image Image Image Image Image
$65 - 89 SMEC
T2 5 Spd - Part #R4532036 Image
$40 - 89 SMEC
5 Spd - Part #R5234940 Image
$30 - 88 SMEC
T2 5 Spd - Part #5233906 No power module included Image 1 Image 2
$40 - 85-87 Power Module 2.2,2.5 Turbo - Part #R5227808 Image
$30 - 85-87 Power Module 2.2,2.5 TBI
- Part #R5227694 Image
$125 Garret T2 Turbo with some shaft play. Probably could use but would recommend rebuilding. Image
$30 - Garret Turbo Core (bolts broke in exhaust housing)-
$30 - 2nd Garret Turbo Core - Image 1
$135 - 2.0/2.4L DOHC
OBX Turbo Manifold with Turbonetics Deltagate Mark 2 wastegate. Image Image Image
$200 - 2.0/2.4L DOHC
Intake Manifold with sensors and TB
off of a 4.7l (60 MM I believe) Includes Silicon reducer. Welded by Mike Radowski. Intake is painted the same color as an 89 Shelby Daytona's ground effects (has chip could probably touch it up). Image Image