Need tii ported exhaust manifold for 86 turbo z 2.2l

[Mdniteracr1]

Hey !! Im redoing my exhaust & figured since im dropping the whole exhaust system down, I might as well put on a TII exhaust manifold . Im doing her up with a 2.5" exhaust.
If anybody has a nice TII ported exhaust manifold , please let me know.

Also, If I throw on a TII manifold, do I now need to change my Turbo Compressor housing due to clearance issues??

[Mdniteracr1]

Bump !!

[thinkofhairy]

Quote:

Originally Posted by Mdniteracr1 Also, If I throw on a TII manifold, do I now need to change my Turbo Compressor housing due to clearance issues??

No you don't.

[Force Fed Mopar]

Only difference in a T1 log mani and a T2 mani is the notch between the top 2 studs to clear the newer intakes. The T2 mani does not flow more than the T1. A T2 mani will fit on a T1 log car w/ no issues whatsoever.

[Mdniteracr1]

Quote:

Originally Posted by Force Fed Mopar Only difference in a T1 log mani and a T2 mani is the notch between the top 2 studs to clear the newer intakes. The T2 mani does not flow more than the T1. A T2 mani will fit on a T1 log car w/ no issues whatsoever.

Im eventually going to be doing all the TII conversions to the Turbo Z like , intake, injectors, I/C , but thats in time. If Im pulling out the old exhaust & putting up the 2.5 I figured I might as well change the mani now . If I put in a ported TI or TII now, will that help me to get extra performance/flow from my new exhaust? If it wont make a big difference, I guess I will just wait for a TII ported mani & get it at a later time.
Let me know
Thanks dude !!

[Force Fed Mopar]

A ported mani will help a little. The more mods you do, the more it'll help. If you're going T2 later on then sure, go ahead and grab one. One less less thing to buy later :)

[The Pope]

I'll sell you this one for $100 + shipping. It is now used so it has soot on it but same manifold pictured. Ported and polished, and ground down on the head side to sit flat.

[Force Fed Mopar]

Nice piece ^^