Clayton's 85 GLH thread!

[itsbudda]

you can walk a T1 baron. what more do you want?

[moparfwdsleeper]

Quote:

Originally Posted by itsbudda you can walk a T1 baron. what more do you want?

not with the G-head on it. I got walked by a Honda Civic(it wasn't stock, I bet one of those already).

[itsbudda]

scary. No wonder you're tinkering with it. I have faith you can break 170hp with an N/A

[Dodgevanman]

Some one on here had a omni that was a n/a and it was a beast lol it was kinda redish pink with a ricer spoiler on it. it was in the forsale section in like november it was NICE he had a laptop to dial every thing in even

[moparfwdsleeper]

With the TBI setup I think im about maxxed out with the engine. With a carb setup there is more to be grabbed!

[BAKES]

DC made along time ago a holley flanged 4bl manifold i have never see one but who is to say you cannt make one using a 81to84 manifold bolt to head as a jig and cut the center out and mig weld in a 4bl box to accept a a small vac secondary holley hell you could even put a NOS plate on it.

[vntned]

You better do something to make that GLH faster! As soon as I get my GLH going Im comin for ya! Itll be the slowest episode of Pinks ever! Ill even have you at least tied in the suspension department, maybe even beat!

Heres your competition:

Mancini Racing built common block 2.2 all forged and balanced, milled to obtain 10.5:1!
FM Stage 3 Big valve ported head!
MP Race header w/ 1 3/4'' primaries!
2.5'' mandrel exhaust
MP 767 cam (460 lift) w/ MP multi Keyway cam gear!
(I have a MP 550 lift Mechanical cam but that sounds a little scary)
FM Billet UDP
MP Oil pan w/ windage tray
Dual sidedraft Weber 45 DCOEs!
Mallory mechanical Dist.
MSD coil and Ignition
Centerforce Stage 3 clutch
3.87FD A525

MP AutoX springs
MP Frt and Rear Swaybars
Kcar Frt disk brakes
220mm rear drums
15''x7'' Panasports w/ sticky tires!

Better get ready! : )

[BAKES]

What that i here someone already want to negoiate lengths already lol.

[moparfwdsleeper]

Quote:

Originally Posted by vntned You better do something to make that GLH faster! As soon as I get my GLH going Im comin for ya! Itll be the slowest episode of Pinks ever! Ill even have you at least tied in the suspension department, maybe even beat! Heres your competition: Mancini Racing built common block 2.2 all forged and balanced, milled to obtain 10.5:1! FM Stage 3 Big valve ported head! MP Race header w/ 1 3/4'' primaries! 2.5'' mandrel exhaust MP 767 cam (460 lift) w/ MP multi Keyway cam gear! (I have a MP 550 lift Mechanical cam but that sounds a little scary) FM Billet UDP MP Oil pan w/ windage tray Dual sidedraft Weber 45 DCOEs! Mallory mechanical Dist. MSD coil and Ignition Centerforce Stage 3 clutch 3.87FD A525 MP AutoX springs MP Frt and Rear Swaybars Kcar Frt disk brakes 220mm rear drums 15''x7'' Panasports w/ sticky tires! Better get ready! : )

I'll autocross you LOL, straight line only if we negoiate what James brought up

Quote:

Originally Posted by BAKES What that i here someone already want to negoiate lengths already lol.

Im liking this comment Good looking out James!

__________________________________________________ _______________

Maybe I should get that TII engine and 520/555 hybrid(with moly plate) transmission built! I don't think the TBI in current form is going to do it:

Then again considering the G-head may not be shaved a 782 deshrouded with +1mm valve's shaved .030" may make it a bit peepy!

My first negioation LOL Can I put SC seats in and take out the heavy Daytona ones(or just have a driver SC seat LOL)?

[BAKES]

Quote:

Originally Posted by moparfwdsleeper I'll autocross you LOL, straight line only if we negoiate what James brought up Im liking this comment Good looking out James! __________________________________________________ _______________ Maybe I should get that TII engine and 520/555 hybrid(with moly plate) transmission built! I don't think the TBI in current form is going to do it: Then again considering the G-head may not be shaved a 782 deshrouded with +1mm valve's shaved .030" may make it a bit peepy! My first negioation LOL Can I put SC seats in and take out the heavy Daytona ones(or just have a driver SC seat LOL)?

If you put a turbo in it you can race my project RAT TRAP lol

[BAKES]

No no always 1st race heads up lol.

[itsbudda]

I'll race you! and i'll lose

[BAKES]

Quote:

Originally Posted by itsbudda I'll race you! and i'll lose

we can race lebaron against lebaron i have one of those too? lol

[itsbudda]

I'll race your 94. sure. You wanna come to ohio, or should i come to canada?

[moparfwdsleeper]

Quote:

Originally Posted by BAKES If you put a turbo in it you can race my project RAT TRAP lol

We could always set it up where RAT TRAP races my 87 CSX when she is back alive. It won't be anything but stock