3rd gen front to 2nd gen front?

[bluneon]

was wondering if it's possible to put on a 2nd gen front end onto a 3rd gen. what about the flip-up headlights and the module?

[xtrempickup]

different fenders, hood, wiring, rad support, header, etc. way too much work in my opinion no to mention the body lines wont line up

[newmember]

It'd take a lot of time and a good chunk of change to make it all look good. Why do you want to do this nose job?

[rich tideswell]

Quote:

Originally Posted by bluneon was wondering if it's possible to put on a 2nd gen front end onto a 3rd gen. what about the flip-up headlights and the module?

Quote:

Originally Posted by xtrempickup different fenders, hood, wiring, rad support, header, etc. way too much work in my opinion no to mention the body lines wont line up

Seriously....even if the car is hit in the front, it's still ALOT of work to change it......you'll be chasing wiring all the way under dash to get the headlamps to work. Also, the frame dimentions changed between the 84-90 cars and 91-93 cars.

1992/1993 Daytona's are unique to themselves as far as most exterior panels go.

Just as an example, left front fender pn's:

84-86 is 4293231
87-91 is 4549107
92-93 is 4713861