Join Date: Jan 2003
Location: Salem, Virginia
My Ride: 1988 Shelby CSX-T
Thanked 0 Times in 0 Posts
Re: seat swap?
I don't have them done yet but I can tell you how it will be done. Unfortunately, without an SRT4 seat to look at you may be lost with my description.
Both front and rear SRT4 seat track feat are welded to the track so you have to grind the weld down...and in the case of the rear feet you have to unbolt them also....and separate them from the track.
Once removed the SRT4 front feet need to be heated and bent at the same angle as the factory front feat.
The rear SRT4 feet are flat just like the stockers so no bending there. There is a support bar that bolts to both rear feet that will need to be removed and a section welded in to accommodate the width increase.
From there on out they feet just need to be space apart further from one another and welded back to the seat track. Use your factory seat/seat track for measurements.
1988 Shelby CSX-T #152