Cruise Control

[1985ShlbyChrger]

I have all the parts to put the Cruise in my car(88 Shelby Z) I got the parts out of an 89 Lebaron GTC T2 car. My question is how do i go about putting the Cruise control turn signal stalk on my original steering column? The one from the Lebaron is brown and also not very nice. Any ideas on how i could make it work?

[1985ShlbyChrger]

Any help?

[minimopar]

It's kind of a pain. The stalk comes out by removing the two phillips screws behind the dust cover at the base of the stalk. The fun part is routing the extra wires for the cruise switches. You need to remove the steering wheel and try to fish the wire through the tunnel that holds the other steering column wires. You can do this easier by pushing a stiff wire through from the bottom and pulling the new wires through.

[e_fractal]

Anyone ever relocate the CC to the dash? I'm looking at an aftermarket steering wheel without CC accommodation

[topdollar69]

the easiest thing to do would be to switch to a non airbag style steering column that has the cruise on the blinker switch. You might have to get one from a car thats a few years older, but Im not really sure of you application, do you have more details?