Turbo Dodge Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 59 Results
  1. Project Log
    We've been chugging along and hauling ass on the Turbo Z. We took the cam and cam rockers from the 88 EFI we have as they are the same but the rollers keep the idle better (according to Gary D). We've painted the engine block while it's apart, waiting for the head to come back. For the valve...
  2. Project Log
    As of a few days ago, we pulled the engine out of the Turbo Z. 12/12/84. Next, we pulled apart the engine. We plan on resealing it, new water pump, etc. The head will be going out to the machine shop to get cleaned up- that’s a massive sohc.
  3. Parts Wanted
    I am located in Columbus Ohio Searching for good 2.2L Spirit RT engine or good short block. My car is currently for sale on another thread, but I would much rather fix this car before I move. Please let me know if you have one for sale or know where to find one. Thank you-
  4. Parts Wanted
    Title says it, I need a known working condition one, let me know, please and thanks!
  5. Parts Wanted
    Hey I was installing my '86 2.2 in my '92 Spirit and realized the earlier engine must take a different mount bracket to the front, radiator-side mount??? I never knew this... Please tell me something or some combination of things out there will work... I have $, I need to get this done...
  6. Parts Wanted
    Bottom end just went tho morning in my spirit. 92 Auto 2.5. N/A Idc whether it's a 2.2 or 2.5 or N/A or Turbo. I just need something that for sure is in good working condition with no noise! Idc if it has a head or not or tranny or not! Please let me know what you've got, I can come get it. Ca$h...
  7. Turbo Dodge Help
    Bottom end just went tho morning in my spirit. 92 Auto 2.5. N/A Idc whether it's a 2.2 or 2.5 or N/A or Turbo. I just need something that for sure is in good working condition with no noise! Idc if it has a head or not or tranny or not! Please let me know what you've got, I can come get it. Ca$h...
  8. New Member Intros
    So this is the first time on site and I got a question for anyone out there I have a 87 Dodge Daytona 2.2 liter turbo engine and it won't start I drove it home after I bought it changed the distributor spark plugs and spark plug wires and distributor cap and it hasn't started since wants to know...
  9. Chrysler V6 engines
    I'm trying to find a 3.8L block to use for my 89 Daytona to V6 swap. It's incredibly hard to find a '94 Caravan with the 3.8L. However, I have found tons and tons of 3.8L newer gens. I was curious if an old '94 era ECU could run a ~2000 3.8L. From what I've read (I've read A LOT about this) the...
  10. Turbo Dodge Help
    I have a 2.5L '89 Daytona ES with a thrown rod. I'm wanting to do an engine swap and trying to figure out what would be best. Idea #1: Swap a late model DOHC 2.4L (pre-2004) and change out cams and stuff for more power Idea #2: Swap a 3.3/3.8 pushrod V6 into it. Idea #3: Put another...
  11. Parts Wanted
    Does anyone have a Shelby valve cover for sale? tell me asking price
  12. Parts Wanted
    ok so im located in charleston south carolina. i'm looking for a complete running engine that doesn't smoke or have any strange noises coming from it and that i can bolt up and go or a long block i can bolt my parts on to. im willing to drive up to 3 hours one way. if there is any one that can...
  13. Parts Wanted
    looking to find a good used or rebuilt turbo2.2 or 2.5 short or long block. really would like to get my rampage back on the road this summer :thumb:
  14. Parts Wanted
    anybody got one in the detroit area?
  15. Engine - General, Exhaust & Induction
    I recently bought a 93 Plymouth Grand Voyager with the 3.3L motor and I'd like to swap it out. I don't know what I'd like to do with it though. Get a stock 2.4L out of a Caravan and eventually upgrade its internals then turbo it. Build up a 2.5L with 2.2L turbo II components and bolt an A523 5...
  16. Parts For Sale
    full T1 top mount intercooler T1 cam/rockers/lifters T1 Turbo cam = T2 cam for most part little diff comes with glider rockers/lifters T1 a/c radiator - reg radiator T1 computer 8,12 T1 shortblock needs piston rings block is fully apart except the crank ANYTHING THATS IN THE ENGINE BAY EXCEPT...
  17. TurboDodge Snapshots
    This my custom 16V conversion project
  18. Engine - General, Exhaust & Induction
    I am about to do a rebuild on my bottom end. I am wondering where a good place to be to get a good quality reman crankshaft. I found one from Marshall Engines on Rock Auto. is this a good one, or does somebody think there is a better one?
  19. Parts For Sale
    Parting out the drivetrain on my 86 daytona cs auto.engine is dissmantled needs rings swirl piston head is 287 has small chip on side of one of collant ports also selling dealer installed top mount intercooler.all drivetrain/engine are for sale also have a turbo cam slider rockers slider lifters...
  20. Parts Wanted
    Looking for either a full common block short block, preferably a 2.2 or just the block itself. Looking for something in the Minnesota area unless you have an affordable method of shipment.
1-20 of 59 Results
Top